Napco Security Technologies GEM-P400 manual Protecting Yourself While at Home, Instant Mode

Page 7

Arming Your System

Protecting Yourself While at Home

1 Before arming your system, make sure the green Status light is ON. This indicates that all of your protective zones are secure. If any zones are open, the corresponding zone number will be lit. Secure those zones before proceeding.

2 Enter your User Code and press ￿. The green Status light will go out, and the red Armed light will light.

3 Before your exit delay expires, press ￿to bypass any interior zones, deactivating devices such as motion sensors,

Oand allowing free movement throughout the premises. The Zone light of any bypassed zones will flash slowly.

Your system may have been programmed for Automatic Interior Bypass , in which case it will recognize that you have not left the premises and will automatically bypass any interior zones.

Instant Mode

Pressing ￿will cancel the Entry delay , activating the “Instant” mode. This is typically done in the evening when all family

members are home for the night. Instant Mode can be activated at any time after the system has been armed. The red Armed light will flash rapidly while in the Instant Mode.

Easy Exit (optional)

Your System may have been programmed to allow Easy Exit, which allows a user to exit the premises with the system armed. By pressing ￿followed by ￿, the protection is removed from the Exit/ Entry zone for 3 minutes.

This will allow, for example, an early morning commuter to exit the house in the morning, without having to disarm and rearm the system, waking the family.

Arming with a System Trouble Present (TROUBLE is lit)

If the GEM-P400 has a system trouble present, TROUBLE will be lit and the keypad sounder pulsing. If you cannot immediately clear the trouble, the system can still be armed. Simply press ￿followed by ￿to view the trouble. Press ￿to view any other troubles, and exit the TROUBLE mode when done. Enter your User Code and press￿￿to arm the system. For more information, refer to page 11. Note: System troubles should be repaired as soon as possible.

7

Oi230a

Tuesday, September 16, 1997 08:26

page 7

 

Page 6 Page 8
Image 7
Page 6 Page 8
Contents 20387 Oi230a Introduction Important Test Your System Weekly I N Keypad Controls and IndicatorsBypassing Zones Arming Your System When LeavingArming Your System Easy ArmArming with a System Trouble Present Trouble is lit Instant ModeProtecting Yourself While at Home Easy Exit optionalEmergency Conditions Ambush AlarmEmergency Buttons Silencing an Alarm Disarming Your System / Silencing an AlarmDisarming Your System when Returning Alarm IndicationSpecial Functions Easy Arm when system is disarmedSystem Troubles Mode if there are no more troubles to viewOr dispose of in fire Programming User Codes Entering the User Program ModeGlossary Oi230a Napco Limited Warranty

GEM-P400 specifications

Napco Security Technologies GEM-P400 is a state-of-the-art security control panel designed for residential and commercial applications. This robust system offers a comprehensive suite of features that enhance security and streamline system management.

One of the standout features of the GEM-P400 is its ability to support a wide range of security devices. It can integrate seamlessly with various sensors, alarms, and cameras, providing users with flexibility and scalability in their security solutions. With the capacity to manage up to 40 zones, the GEM-P400 ensures that every aspect of a property is covered, from doors and windows to motion detectors.

The GEM-P400 utilizes advanced communication technologies, including IP and cellular connectivity. This dual-path communication method ensures that users receive real-time alerts and notifications, even during a power outage or if the phone line is cut. This redundancy is crucial for maintaining security and peace of mind.

Another notable characteristic of the GEM-P400 is its user-friendly interface. The panel is equipped with an intuitive keypad that allows for easy navigation and operation. Users can quickly arm or disarm the system, adjust settings, and check system status with minimal hassle. Furthermore, the system supports remote access via mobile apps, enabling users to monitor their security setup from anywhere in the world.

The GEM-P400 also offers programmable functions, providing customization options to fit various user needs. This includes the ability to configure specific alarm settings, schedules, and access levels for different users. Such flexibility ensures that whether it’s a family home or a business, the security setup can be tailored to meet specific requirements.

Additionally, Napco Security Technologies emphasizes the importance of reliable performance. The GEM-P400 is built with durability and longevity in mind. It incorporates advanced hardware that ensures stable operation, reducing the likelihood of malfunctions and improving overall reliability.

In summary, the GEM-P400 from Napco Security Technologies distinguishes itself as a feature-rich, flexible, and robust security panel. Its integration capabilities, dual-path communication, user-friendly interface, and advanced programmability make it an excellent choice for both residential and commercial security needs. With its commitment to quality and performance, Napco Security Technologies continues to be a trusted name in the security technology industry.
Top Page Image Contents