Blower Installation, GAS Installation | Napoleon Fireplaces GVFS20P

BLOWER INSTALLATION

Blower (SEE LOCATION AND CLEARANCES IN INSTRUCTION MANUAL)

1.Cut and remove the tie securing the blower switch wires to the heat shield.

2.Connect the white wire coming from below the unit to the terminal on the blower.

3.Connect the black blower wire to the black wire coming from below the unit.

4.Insert the clips on the blower housing into the cutouts in the rear shield. Push down to lock the clips into position.

5.Secure the blower using the screw and lock washer sup- plied.

Note: Ensure that all the wires are tucked into the blower switch housing.

7	7	9

Switches

6. Open the switch housing by removing the top screw.
7. With the 2 screws		THERMODISC
and extension bracket		THERMODISC
and extension bracket		BRACKET
supplied	in the unit
baggie, fasten extension
bracket to the thermodisc
bracket.	Install bracket

	assembly as shown, using
	2 of the screws supplied.	THERMODISC
	Connect the ﬂ agged leads
		EXTENSION
	to the terminals of the
		BRACKET
	thermodisc.

8.Remove the knock out from the switch housing label. Install the variable speed switch (rheostat) into the housing with the wires facing up. Secure the switch to the housing using the pal nut and the knob supplied.

9.Connect the male connector on the switch to the female connector coming from the unit.

10.Pilot Indicator Light: Install the batteries as shown. Replace the batteries annually. Note: If replacing the pilot indicator light , ensure that the red wire lead connects to the red lead of the thermopile and black to white.

11.Tuck all of the wires into the switch housing and close. Secure using the screw removed in step 6.

7	7	9

1	4
	4
This unit comes equipped	2
This unit comes equipped
with a pilot indicator light 3	8
that blinks every few	8
seconds when the pilot	5
is on.

For more information see

step #10.

GAS INSTALLATION

1.Install rigid black pipe, or 1/2" type L copper tubing with a shut-off valve to the stove.

2.Seal and tighten the gas line securely to a ﬂ ex connector.

DO NOT KINK FLEXIBLE CONNECTOR.

For ease of accessibility, an optional remote wall switch or millivolt thermostat may be installed in a convenient loca- tion. Route 2 strand solid core millivolt wire from the gas stove to the wall switch / millivolt thermostat. The recom-

3/8NPT

ADAPTER FITTING

2TPTH

TP TH

TOLIP

FLEXIBLE				SHUT OFF
	CONNECTOR			VALVE
				1/2FPT
				BLACK
				PIPE
			3. Check for gas leaks by
OL			brushing on a soap and
	N	O	brushing on a soap and
	N	F	water solution. Do not use
HI	O	F
	TOL
	IP

open ﬂ ame.

mended maximum lead length depends on the wire size:

wire sizemax. length
14gauge	100 feet
16gauge	60 feet
18gauge	40 feet

Disconnect the existing wires from terminals 1 and 3 (from the on/off switch) and replace with the leads from the wall switch/millivolt thermostat.

W415-0559 / 02.15.06

GVFS20P, GVFS20N specifications

The Napoleon Fireplaces GVFS20P and GVFS20N gas fireplaces are elegant and functional additions to any living space, offering a blend of modern technology and classic aesthetics. These versatile units are designed to enhance the ambience of your home while delivering efficient heating solutions.

One of the standout features of the GVFS20P and GVFS20N is their customizable design. Available in both propane and natural gas models, these fireplaces allow homeowners to select the fuel type that best suits their needs. This adaptability makes them a popular choice among consumers looking for flexibility in their heating options.

The GVFS series boasts a compact design, making it suitable for various living spaces, including smaller rooms that may not accommodate traditional fireplaces. With a viewing area that maximizes flame exposure, these models elegantly showcase the dancing flames, creating a cozy atmosphere.

Equipped with Napoleon's patented PHAZER log set and glowing ember bed, the GVFS20P and GVFS20N replicate the natural look of a wood-burning fireplace. The realistic flames, combined with the realistic log set, provide a stunning visual experience while ensuring efficient heat production. Moreover, the inclusion of a tempered glass front helps prevent heat loss, allowing for optimal energy efficiency.

The GVFS models are also equipped with advanced technology features, including a Bluetooth-enabled remote control that allows users to adjust the flame height and heat output from the comfort of their seating area. This user-friendly interface maximizes convenience, enabling you to create the perfect ambiance with just a few clicks.

Another key characteristic of these fireplaces is the patented firebox design that enhances combustion efficiency while reducing exhaust emissions. This technology ensures that both models meet strict environmental standards while delivering impressive heating performance. The GVFS20P and GVFS20N also come with safety features, including an automatic shut-off system that contributes to peace of mind for users.

In summary, the Napoleon Fireplaces GVFS20P and GVFS20N stand out in the market for their aesthetic appeal, advanced technologies, and user-friendly features. With their beautiful flame display, customizable options, and commitment to efficiency and safety, they represent a superb choice for anyone looking to enhance their home with a modern gas fireplace solution. Whether you prioritize design, functionality, or environmental responsibility, these models deliver on all fronts, making them a worthwhile investment for any cozy living space.