Floor Clearance

EYF Series Unvented Gas Log Set

The gas log heater must be installed at least 5" above any combustible flooring material, such as carpeting or tile, which is closer than 14" to the base of the fireplace. The minimum distance must be maintained from the top surface of carpeting, tile, etc. Figure 9

OR,

The gas log heater may be installed nearer to the floor if a minimum of 14" of noncombustible material such as slate or marble is installed between the base of the fireplace and the combustible flooring. Figure 10

Heater in Fireplace or firebox

			Combustible
	5” Min.
			Material

FP2536

Figure 9 -

Minimum Clearance Above Combustible Flooring

Combustible

Heater in Fireplace or Material

Firebox

This Distance May

Now be Less than 5"

14” Min.

FP2537

Figure 10 -

Minimum Clearance above Combustible Flooring with Noncombustible Material Installed at Base of Fireplace

INSTALLATION

FIREPLACE PREPARATION

	WARNING	Before installing in a solid fuel burning
	WARNING	fireplace, The chimney flue and firebox must
		fireplace, The chimney flue and firebox must
		be cleaned of soot, creosote, ashes and
		loose paint by a qualified chimney cleaner.


		This appliance is for installation only in a solid
		fuel burning fireplace (masonry fireplace or
	WARNING	manufactured fireplace) with a working
	WARNING	flue and constructed of noncombustible
		flue and constructed of noncombustible
		material.
		Exception: DO NOT install this appliance
		in a factory-built fireplace that includes
		instructions stating that it has not been
		tested or should not be used with unvented
		gas logs.

Before fully installing the unit:

•Turn OFF the gas supply to the fireplace or firebox.

•Seal any fresh air vents and/or ash clean-out doors located on the floor or wall of the fireplace. If left un- sealed, drafting may cause pilot outage or sooting. Use a heat resistant sealant. Do not seal the chimney flue damper.

INSTALLING VENTED APPLICATIONS

Manual and millivolt controlled gas logs may be installed as a vented decorative log set in compliance with ANSI Z21.60 and National Fuel Gas Code, Section 6.6 Since, the gas logs are operated with the damper open, non-combustible material and minimum mantel requirements do not apply.

Before installing the appliance:

•Turn off gas supply to fireplace or firebox.

•Have the fireplace floor and chimney professionally cleaned to remove ashes, soot, creosote or other ob- structions. Have this cleaning performed annually after installation.

•Seal any fresh air vents or ash clean-out doors located on floor or wall of fireplace. If not, drafting may cause pilot outage or sooting. Use a heat-resistant sealant. Do not seal chimney flue damper.

Install and operate the appliance as directed in this manual.

65D1009

EYF24, EYF18 specifications

The Monessen Hearth EYF24 and EYF18 represent a perfect blend of style, efficiency, and innovative technology in the world of vent-free gas fireplaces. Designed for homeowners who desire warmth and ambiance without the complexities of traditional fireplaces, these units stand out as reliable heating solutions.

The EYF24 and EYF18 are designed with a sleek and modern aesthetic, making them suitable for a variety of home decors. Their compact size allows for versatile installation options, making them ideal for both small spaces and larger living areas. With a focus on ease of use, both models come equipped with user-friendly controls, enabling homeowners to adjust the flame height and heat output effortlessly.

One of the standout features of these Monessen fireplaces is their vent-free technology. This allows the units to operate efficiently without the need for a chimney or flue, which means less installation cost and hassle. The design also facilitates greater flexibility in placement, as they can be installed in virtually any room. Whether you want to enhance a cozy den or add warmth to a larger gathering space, the EYF24 and EYF18 are adaptable to your needs.

Another notable characteristic is their high-efficiency rating. Both models utilize advanced burner technology that maximizes heat output while minimizing energy consumption. This capability not only ensures a comfortable indoor environment but also helps in reducing heating costs. The units are designed to generate realistic flames, creating an inviting ambiance that can be enjoyed year-round.

In terms of safety, Monessen has integrated several features into the EYF24 and EYF18. The oxygen depletion sensor (ODS) automatically shuts off the unit if oxygen levels fall below safe limits, providing peace of mind for homeowners. Additionally, the units are designed to operate quietly, allowing for an undisturbed living experience.

Customization options also abound with these models. Homeowners can select from a range of decorative media, including logs, stones, and glass, to personalize their fireplace's appearance. This flexibility ensures that each installation can be uniquely tailored to match individual tastes and home styles.

In conclusion, the Monessen Hearth EYF24 and EYF18 fireplaces are excellent choices for anyone seeking a stylish, efficient, and safe heating solution. With their modern design, vent-free technology, and user-friendly features, they offer an inviting and warm atmosphere that can enhance any home environment.