Intended Product Usage

DO NOT INSTALL A SEPARATE SOLID FUEL INSERT OR GAS FIREPLACE INSERT IN THIS FIREPLACE AND CHIMNEY

CAUTIONARY INFORMATION

1.Read these instructions entirely before beginning any part of the installation. Save these instructions for any future repairs.

2.Use these instructions as a guide during the installation of the fireplace.

3.Be sure these instructions become the property of and are reviewed by all future users of this fireplace to encourage proper operation and maintenance.

4.All the parts used with this fireplace system must be installed in accordance with these installation instructions. Failure to do so may be hazardous and will void the warranty.

5.This fireplace and accessories should not be altered in any way that is not specifically recommended in this manual.

6.Refer to your local building code for local requirements pertaining to installation of factory-built fireplaces. Monessen Hearth Systems fireplaces are intended for installation and use according to standard NFPA 211 of the National Fire Protection Association.

7.This fireplace must not be installed with a masonry flue.

8.This fireplace and chimney should not be used for venting a wood or coal burning heater or fireplace insert.

WARNING:

SYSTEM WITHOUT WRITTEN AUTHORIZATION FROM MONESSEN HEARTH SYSTEMS.

9.Do not pack required air spaces with combustible material or insulation not specifically recommended for use in such areas.

This fireplace is intended for supplemental heating only and is not intended for use as a primary heating system.

This fireplace is designed to sit directly on a combustible floor. The fireplace must be installed with clearances to combustible building materials as specified by this manual. Only parts manufactured by Monessen Hearth Systems and labeled for use with this fireplace should be used in the installation of the fireplace except for special roof flashings that may be fabricated locally. The use of improper parts in the installation can be hazardous and voids the warranty offered by Monessen Hearth Systems.

This fireplace is designed to burn solid wood fuel (wood), UL- classified processed solid fuel fire logs, or a certified decorative gas appliance may be installed in the fireplace as described later by this instruction manual.

This fireplace is not designed to burn coal, unplumbed liquid fuels, unplumbed gaseous fuels or household refuse. Any attempt to burn these fuels in the fireplace can be hazardous.

NOTICE: THIS FIREPLACE IS NOT DESIGNED FOR INSTALLATION IN MANUFACTURED HOMES WITHOUT A VENTED ATTIC SPACE. THE FIREPLACE MAY BE INSTALLED IN MANUFACTURED HOMES WHICH HAVE A VENTED ATTIC SPACE IF THE FIREPLACE IS EQUIPPED WITH MGD36B OR MGD36PB GLASS DOORS, AN AK6 OUTSIDE COMBUSTION AIR KIT (INSTEAD OF THE AK4 OUTSIDE COMBUSTION AIR KIT OFFERED FOR RESIDENTIAL TYPE HOMES AS DESCRIBED LATER BY THIS INSTRUCTION MANUAL), A SVTR FIRESTOP THIMBLE, AND THE MINIMUM INSTALLED HEIGHT FROM FLOOR TO FLUE OUTLET IS16 FEET. SEE FIGURE 1.

CAUTION: DO NOT USE A FIREPLACE INSERT OR OTHER PRODUCT NOT SPECIFIED FOR USE WITH THIS FIREPLACE.

WARNING: IMPROPER INSTALLATION OR USE OF THIS FIREPLACE WILL VOID ITS WARRANTY AND CAN CAUSE:

1.Damage to the fireplace from overheating.

2.Hazardous temperatures to develop on combustible materials adjacent to the fireplace or chimney.

3.The emission of smoke, sparks or hazardous gases into the dwelling.

4.Leakage of rain water into the dwelling.

53D9033. Rev 1 03/03

SWB400I specifications

The Monessen Hearth SWB400I is a versatile and efficient gas fireplace insert designed to enhance the aesthetic appeal and comfort of any home. It is an ideal solution for homeowners looking to upgrade their existing wood fireplace or transform an unutilized hearth into a modern, functional heating source.

One of the key features of the SWB400I is its impressive heating capacity. This insert can produce up to 40,000 BTUs, effectively warming areas of approximately 1,500 square feet. This makes it a powerful option for larger living spaces, ensuring consistent comfort during the colder months. The unit is equipped with a patented dual burner system that provides a realistic flame presentation while maximizing efficiency. Its efficient design means that users can enjoy a warm ambiance without worrying about excessive fuel consumption.

The Monessen SWB400I also boasts an advanced electronic ignition system, ensuring reliable starts every time. This technology eliminates the need for cumbersome matches or lighter fluid, making it user-friendly. In addition, the fireplace insert includes a built-in thermostat control, allowing homeowners to maintain the desired temperature with ease.

Another notable characteristic of the SWB400I is its customizable aesthetic options. Homeowners can choose from a variety of decorative fronts, including traditional and contemporary styles, to seamlessly integrate the insert into their home’s decor. The unit also features multiple media options, such as logs or contemporary glass pebbles, providing a personalized touch to the fireplace’s appearance.

Safety is a top priority with the SWB400I. It is equipped with a safety pilot system that automatically shuts off the gas supply in case of an emergency, ensuring peace of mind for users. Additionally, the fireplace insert comes with a removable safety screen that prevents accidental contact with the hot glass surface.

In summary, the Monessen Hearth SWB400I is a powerful, stylish, and efficient gas fireplace insert that combines innovative technology with customizable features. Its ability to produce significant heat, easy-to-use ignition system, and various aesthetic options make it a desirable addition to any home. Whether you're looking to increase your home's warmth or enhance its visual appeal, the SWB400I is an excellent choice for homeowners seeking quality and performance.