Monessen Hearth IDV490NVC, IDV490PVC Never connect unit to private, Non-utility gas wells. This

Page 4

IMPORTANT SAFETY INFORMATION

Continued from page 3

4.Never install the insert

•in a recreational vehicle

•where curtains, furniture, clothing, or other flammable objects are less than 36" from the front, top, or sides of the insert

•in high traffic areas

•in windy or drafty areas

5.This insert reaches high temperatures. Keep children and adults away from hot surfaces to avoid burns or clothing ignition. Insert will remain hot for a time after shutdown. Allow surfaces to cool before touching.

6.Carefully supervise young children when they are in the room with insert.

7.Do not modify this insert under any circumstances. Any parts removed for servicing must be replaced prior to operating insert.

8.Turn insert off and let cool before servicing, installing, or repairing. Only a qualified service person should install, service, or repair the insert. Have burner system inspected annually by a qualified service person.

9.You must keep control compartments, burners, and cir- culating air passages clean. More frequent cleaning may be needed due to excessive lint and dust from carpeting, bedding material, pet hair, etc. Turn off the gas valve and pilot light before cleaning insert.

10.Have venting system inspected annually by a qualified service person. If needed, have venting system cleaned or repaired. See Cleaning and Maintenance, page 32.

11.Keep the area around your insert clear of combustible materials, gasoline, and other flammable vapor and liq- uids. Do not run insert where these are used or stored. Do not place items such as clothing or decorations on or around insert.

12.Do not use this insert to cook food or burn paper or other objects.

13.Never place anything on top of insert.

14.Do not use any solid fuels (wood, coal, paper, cardboard, etc.) in this insert. Use only the gas type indicated on rating plate.

15.This appliance, when installed, must be electrically grounded in accordance with local codes or in the absence of local codes, with the National Electrical Code, ANSI/NFPA 70, or the Canadian Electrical Code, CSA C22.1.

16.Do not obstruct the flow of combustion and ventilation air in any way. Provide adequate clearances around air openings into the combustion chamber along with adequate accessibility clearance for servicing and proper operation.

17.Do not use insert if any part has been exposed to or under water. Immediately call a qualified service person to arrange for replacement of the unit.

18.Do not operate insert if any log is broken.

19.Do not operate the insert with glass door removed, cracked, or broken.

We suggest that our gas hearth products be installed and serviced by professionals who are certified in the U.S. by the National Fireplace Institute® (NFI) as Gas Specialists.

www.nficertified.org

WARNING

 

Never connect unit to private

 

 

 

 

(non-utility) gas wells. This

 

 

gas is commonly known as

 

 

wellhead gas.

 

 

 

4

57D0016

Page 3 Page 5
Image 4
Page 3 Page 5
Contents Models What to do if YOU Smell GASContents Installer Important Safety InformationOwner Never connect unit to private Non-utility gas wells. ThisGas is commonly known as Wellhead gasProduct Specifications Product Features and Code ApprovalCode Approval PRE-INSTALLATION Information Installing Above 2000 FeetInstallation Planning Orifice SIZES, Pressures and BTUsFireplace and Insert Dimensions Inserts IDV490NV/PVC IDV380NV/PVCGeneral Installation Information Insert ApplicationsInstallation Insert ClearancesMantel Clearances Hearth RequirementsInsert Placement Insert PlacementZERO-CLEARANCE Metal Fireplace Requirements GrateVent Installation Installation PrecautionsVent Requirements Venting UnitConnecting Exhaust Pipe to Heater Altitude ConsiderationsVent Configurations Inlet and Exhaust RelineManifold Removal and Installation Chimney Manifold Flex VentInstalling GAS Piping to Insert Location Insert InstallationCheck GAS Type Gas Connection Do not use open flame to check for Checking GAS PressureGas leaks Electrical Wiring Electrical InstallationRemote Wall Mounted Switch LOG Placement Installing Logs and Rock Wool Ember Material in FireboxInstalling Left Log #2 Installing Right Center Log #5 Installing Facing Surround InstallationInstalling ON/OFF Switch Filigree Panels and Cabinet Door Frame Installation Installing Filigree Panels Cabinet Door FrameDoor Installation Installing DoorsLeak Testing Operating InstructionsWhat to do if YOU Smell GAS Initial LightingLeak Testing If using a soap and water Solution to test for leaksDo not spray solution onto Its original position when releasedMain Burner Switch Adjusting Blower SpeedLighting the Burner Pilot PositionAIR Shutter Adjustment Natural GAS only Adjusting the AIR ShutterGlass Replacement Removing DoorCleaning and Maintenance Cleaning GlassVenting System Pilot Burner FlamesFirebox Cleaning Maintaining Your HEATER’S AppearanceMaintenance Yearly Service ProcedureBlower Blots Accessory Parts List Description QTY Part NumberParts not Shown Replacement Parts Replacement Parts are Available Through Your Retailer Troubleshooting Observed Problem Possible Cause RemedyInstallation Records Monessen Hearth SystemsFive Year Warranty Lifetime WarrantyBasic Warranty
Related manuals
Manual 40 pages 56.07 Kb

IDV380NVC, IDV490NVC, IDV380PVC, IDV490PVC specifications

The Monessen Hearth IDV490NVC, IDV380PVC, IDV380NVC, and IDV490PVC represent a cutting-edge series of direct vent gas fireplaces that combine efficiency, style, and innovative technology. These models are designed to enhance home aesthetics while providing efficient heating solutions.

One of the standout features of the Monessen Hearth models is their impressive heating capabilities. The IDV490NVC and IDV490PVC are designed for larger spaces, providing up to 37,000 BTUs, while the IDV380NVC and IDV380PVC are suitable for medium-sized areas, delivering up to 30,000 BTUs. This makes each fireplace an ideal choice for various residential applications, accommodating different room sizes and heating needs.

The appliances employ advanced direct vent technology, allowing for safe operation by drawing air from outside for combustion and venting exhaust gases outside. This feature ensures that indoor air quality remains unaffected, making these models eco-friendly alternatives to traditional fireplaces. The efficient combustion process also means lower gas consumption, resulting in cost savings and a reduced environmental footprint.

Each model comes equipped with a variety of flame and control options. The realistic ceramic logs and glowing embers create an inviting ambiance, while the adjustable flame height allows users to customize their experience. Additionally, an easy-to-use remote control feature gives users the convenience of adjusting flames and temperature settings without leaving their seats.

The construction of these fireplaces is robust, featuring high-quality materials that ensure durability and longevity. The heat-resistant glass allows for an unobstructed view of the flames, adding a touch of elegance to any room.

Aesthetic choices further enhance personalization, as Monessen offers customizable options for surrounds and mantels that blend seamlessly with various interior styles.

In summary, the Monessen Hearth IDV490NVC, IDV380PVC, IDV380NVC, and IDV490PVC fireplaces exemplify modern heating technology combined with stylish design. Their powerful heat output, direct vent capabilities, user-friendly controls, and customizable aesthetics make them exceptional choices for homeowners looking to elevate their living spaces while ensuring comfort and efficiency. Whether for aesthetic appeal or functional heating, these models provide a perfect balance for any modern home.
Top Page Image Contents