CWC Series Woodburning Fireplace
Framing
Framing can be constructed before or after the fire- place is set in place, however, most installers build the frame before setting the fireplace.
Frame fireplace with 2 x 4 lumber or heavier materials. Refer to framing dimensions in Figures 1 and 2 for basic fireplace specifications.
NOTE: Framing should be positioned to accommo- date wall covering and fireplace facing material.
Install Electrical Connection
CAUTION: ALL WIRING SHALL BE DONE BY A QUALIFIED ELECTRICIAN AND SHALL BE IN COMPLIANCE WITH ALL LOCAL, CITY AND STATE BUILDING CODES.
IMPORTANT: To prevent electrical shock, the house power must be disabled. This can be accomplished by positioning the circuit breaker to off.
The fan kit assembly and model EB1 junction box are factory installed.
NOTE: Check local building codes to determine if a junction box is required at the romex pigtail/house wire connection.
Install Variable Speed Control
The SCVS Variable Speed Control is tested and safe when installed in accordance with these instructions. Read all instructions before beginning installation. Fol- low instructions carefully.
The SCVS speed control may be used as an alternate wall switch in lieu of the single pole (Listed 1.5 Amp 120V) switch described in the fan or fireplace installa- tion instructions.
Installation Instructions
For mounting the speed control, a 2" deep standard electrical box should be used. Using wire nuts sup- plied with the speed control, connect control in series with fan motors and line voltage. Refer to Figure 9 for wiring diagram.
Mount speed control in electrical box and attach wall plate with screws provided. Push on knob so that indi- cator is in OFF position. (Fig. 10)
Operation
Turn control knob counterclockwise until a click is heard for OFF position. To operate fans, turn knob
clockwise and adjust fan speed as desired.
|
|
|
|
| Ground |
|
|
| White |
| Ground Screw |
|
|
|
|
| |
| Black |
|
|
| Variable Speed Con- |
Wall |
|
|
|
| |
|
|
|
| trol (optional) | |
Junction Box |
|
|
| ||
|
|
|
| ||
(not supplied) |
|
|
|
| |
|
|
|
|
| Wire Nuts |
|
|
|
|
| (supplied) |
| Ground | Green | White | Black | Receptacle |
|
|
|
|
| |
| Stud |
|
|
|
|
| Fireplace |
|
|
|
|
| Junction Box |
|
|
| FP1212 |
Fig. 9 | SCVS wiring diagram. |
| |||
| Electrical Box |
|
| (not supplied) |
|
| Speed Con- |
|
| trol | Cover |
|
| Plate |
|
| Oval |
|
| Head |
|
| Screw |
| LOW |
|
| OFF |
|
| Flat |
|
| Head | Plastic |
| Screw | |
| Knob | |
|
| |
| Wire Nut | FP1213 |
|
| |
Fig. 10 | Speed control mounting. |
|
87D1504