Location Selection, Chimney Installation

FIREPLACE INSTALLATION		624WBPF Woodburning Fireplace

Location Selection

Unpack and check the fireplace and chimney for damage. If any items have been damaged, report this to your dealer. Before beginning the installation, be sure you have the proper parts in sufficient quantity. Refer to replacement parts page for proper identification of parts. Do not substitute parts. Use only parts listed for use with the Model 624WBPF fireplace.

Fireplace Installation

1.Refer to Figure 3 for an example of a typical installation of the fireplace components.

2.Be sure the location of the fireplace will provide the required clearances indicated by Figures 3, 4 & 5 and the minimum chimney air space clearance to combustibles of 2”.

3.Set the fireplace in the desired location and be sure it is securely supported and leveled. Check the face of the fireplace with a carpenter’s level and if it is not plumb; correct it by placing shims under the edges of the fireplace.

4.Block in the fireplace to prevent any shifting of the firebox. Secure the fireplace with nails or screws through the flanges located on each side of the fireplace. Do not enclose the fireplace until the com- bustion air duct and chimney pipes are installed.

NOTE: Some local codes may require electrically grounding the fireplace and chimney.

Chimney Installation

In order to assure safe and satisfactory performance of the fireplace, it is very important to properly install the chimney. This is an important part of the installation and the sections of this manual pertaining to chimney installation should be reviewed very thoroughly.

For your safety, some of the important things to remember in regard to chimneys are listed below:

1.Use only parts and accessories labeled for use with this fireplace.

2.Use only undamaged parts and accessories.

3.Enclose the chimney where it passes through the living spaces to prevent contact with and possible dam-age to the chimney.

4.Install firestop spacers at each ceiling level.

5.Install the proper chimney cap or chimney housing on the chimney to prevent the entry of rain and debris into the chimney and to assure the proper venting of smoke.

6.Do not use more than four (4) elbows in the chimney.

NOTE: To select the proper chimney height, refer to Figure 3. The flue outlet must be a minimum of 3’ above the highest point where the chimney penetrates the roof and a minimum of 2’ above all portions of the building within 10’. If the chimney is to include elbows to offset the chimney, refer to the Chimney Offset and Cap Installation section of this manual. There must be at least 2” air space between all sec- tions of the chimney and combustible materials between floors.

Figure 9	10'

2' Min. 3'

Min.

10'

2' Min. 3'

Min.

NOTE: Flue outlet should be 24” above all portions of the building within 10’ as shown in the illustration. The chimney must not ex- tend more than 90” above the roof without additional support.

AC617

53D9052

624WBPF specifications

The Monessen Hearth 624WBPF is a groundbreaking gas fireplace designed to deliver warmth, comfort, and an aesthetically pleasing ambiance to any living space. It merges advanced technology with traditional craftsmanship, making it a popular choice amongst homeowners and designers alike.

One of the standout features of the 624WBPF is its high efficiency. Boasting an impressive efficiency rating, this fireplace allows for excellent heat output while minimizing energy consumption. This is particularly advantageous in colder climates, where a reliable and efficient heating source is imperative. The fireplace's innovative design allows it to quickly heat large areas, ensuring that your home remains cozy even on the chilliest days.

The Monessen 624WBPF is equipped with state-of-the-art technology, including an intuitive remote control that allows users to easily adjust flame height and heat settings. This feature not only enhances the user experience but also provides the convenience of operation from the comfort of your couch. Furthermore, the fireplace includes a versatile lighting system, allowing for a range of ambiance options to suit any occasion or mood.

Aesthetically, the 624WBPF does not disappoint. It can be customized with a variety of decorative fronts and surround options to seamlessly blend with your home’s décor. The large viewing area showcases a realistic flame presentation, enhanced by premium log sets or contemporary fire media options that create a stunning visual element in your space.

Safety is also a primary concern with the Monessen Hearth 624WBPF. It features a built-in safety shut-off system that ensures peace of mind when leaving the fireplace unattended. Additionally, an advanced venting system allows for flexible installation options, including direct venting, which helps to maintain indoor air quality while ensuring efficient performance.

Overall, the Monessen Hearth 624WBPF combines function, efficiency, and style, making it an excellent addition to any home. Its features, technologies, and characteristics come together to provide a reliable heating solution that enhances both the comfort and aesthetics of your living environment. With its focus on innovation and design, the 624WBPF is indeed a premier choice for those seeking a modern yet classic fireplace experience.