Napoleon Fireplaces GT8P, GT8N General Instructions, General Information, Rates and Efficiencies

Page 4

4

GENERAL INSTRUCTIONS

THIS GAS FIREPLACE SHOULD BE INSTALLED AND SERVICED BY A QUALIFIED INSTALLER to conform with local codes. Installation practices vary from region to region and it is important to know the specifics that apply to your area, for example: in Massachusetts State:

The fireplace damper must be removed or welded in the open position prior to installation of a fireplace insert or gas log.

A carbon monoxide detector is required in all rooms containing gas fired appliances.

The appliance off valve must be a “T” handle gas cock.

The flexible connector must not be longer than 36 inches.

The appliance is not approved for installation in a bedroom or bathroom unless the unit is a direct vent sealed combustion product.

WARNING: This product must be installed by a licensed plumber or gas fitter when installed in the Commonwealth of Massachusetts.

In absence of local codes, install to the current CAN/CGA -B149 Installation Code in Canada or to the National Fuel Gas Code, ANSI Z223.1, and NFPA 54 in the United States. Suitable for mobile home installation if installed in accordance with the current standard CAN/CSA Z240MH Series, for gas equipped mobile homes, in Canada or ANSI Z223.1 and NFPA 54 in the United States.

The fireplace and its individual shutoff valve must be disconnected from the gas supply piping system during any pressure testing of that system at test pressures in excess of 1/2 psig (3.5 kPa). The fireplace must be isolated from the gas supply piping system by closing its individual manual shutoff valve during any pressure testing of the gas supply piping system at test pressures equal to or less than 1/2 psig (3.5 kPa).

When the fireplace is installed directly on carpeting, vinyl tile or other combustible material other than wood flooring, the fireplace shall be installed on a metal or wood panel extending the full width and depth.

GENERAL INFORMATION

FOR YOUR SATISFACTION, THIS FIREPLACE HAS BEEN TEST-FIRED TO ASSURE ITS OPERATION AND QUALITY!

RATES AND EFFICIENCIES

 

NATURAL GAS

PROPANE GAS

Altitude

0 - 4,500*

0 - 4,500*

Maximum Input

6,000

6,000

Maximum Output

4,680

4,680

Efficiency

78%

78%

Minimum Inlet Gas Suppy Pressure

4.5” Water Column

11” Water Column

Maximum Inlet Gas Supply Pressure

7” Water Column

13” Water Column

Manifold Pressure Under Flow Conditions

3.5” Water Column

10” Water Column

*When the fireplace is installed at elevations above 4,500ft, and in the absence of specific recommendations from the local authority having jurisdiction, the certified high altitude input rating shall be reduced at the rate of 4% for each additional 1,000ft.

This fireplace is approved for bathroom, bedroom and bed-sitting room installations and is suitable for mobile home installation.

The natural gas model can only be installed in a mobile home that is permanently positioned on its site and fueled with natural gas.

This fireplace may be installed in an aftermarket permanently located, manufactured (mobile) home, where not prohibited by local codes.

This fireplace is only for use with the type of gas indicated on the rating plate. This fireplace is not convertible for use with other gases, unless a certified kit is used.

Expansion / contraction noises during heating up and cooling down cycles are normal and are to be expected.

Purge all gas lines with the glass door of the fireplace open. Assure that a continuous gas flow is at the burner before closing the door.

Objects placed in front of the fireplace must be kept a minimum of 48” from the front face of the unit.

Use only Napoleon® accessories designed for and listed with the model.

W415-0619 / B / 03.03.08

Image 4
Contents Installation Operation Instructions Table of Contents W415-0619 / B General Instructions General InformationRates and Efficiencies Natural GAS Propane GASVenting Venting Lengths and AIR Terminal LocationsVent Installations Horizontal Vent SectionsTypical Vent Installations Horizontal Termination MIN MAXTypical Vent Installations Vertical Termination Minimum AIR Ternminal Location Clearances Vertical Installation Installation / FramingWall and Ceiling Protection Using Flexible Vent Components Horizontal AIR Terminal InstallationVertical AIR Terminal Installation Elbow SpacersFireplace Vent Connection Mobile Home InstallationConversion Kits GAS Installation Hard Wiring ConnectionSTAND-OFF Assembly IT is Necessary to Hard Wire this FireplaceNailing TAB Installation FramingWithout Frame Installed FinishingClearances to Combustibles Door RemovalFRAME/FRONT Installation Close the control doorAccent Glass Installation LK8 Light Installation OptionalFor Your Safety Read Before Lighting Operating InstructionsMaintenance AdjustmentsGAS Pressure Adjustment Venturi AdjustmentReplacements Replacement PartsAccessories Flexible Vent KitsTrouble Shooting Guide Symptom Problem Test SolutionFireplace Service History
Related manuals
Manual 16 pages 5.54 Kb

GT8N, Fireplace, GT8P specifications

Napoleon Fireplaces has long been recognized as a leader in the heating industry, and the GT8N and GT8P models embody their commitment to innovation, efficiency, and style. These fireplaces are designed to provide not only warmth but also a striking aesthetic that complements various interior designs.

The GT8N and GT8P are part of Napoleon's renowned series of gas fireplaces, which focus on delivering a superior heating experience while maintaining ease of use. One of the standout features of these models is their impressive thermal efficiency, which helps to reduce energy costs while providing consistent heat output. With an energy-efficient design, the GT8N and GT8P ensure that homes remain cozy during the harshest of winters.

Both models offer a range of customizable options to suit individual preferences. The GT8N features a traditional design with classic styling, while the GT8P is more contemporary, boasting a sleek, modern look. The extensive selection of finishing materials, including various trim options and media placements, allows homeowners to customize their fireplace to seamlessly fit into their living spaces.

One of the most innovative technologies featured in the GT8N and GT8P is the advanced heat distribution system. This allows for optimal circulation of warm air throughout the room, ensuring that heat is evenly dispersed and preventing cold spots. The fireplaces are equipped with variable-speed fans that can be adjusted according to the desired heat output, providing flexibility for different situations.

Safety is a top priority in the design of the GT8N and GT8P. Both models come equipped with protective features, such as a built-in safety system that detects any irregularities in operation. Additionally, the fireplaces utilize a sealed combustion system, drawing air from outside for combustion, which minimizes the impact on indoor air quality.

Another key characteristic of the GT8N and GT8P is their ease of installation and maintenance. These fireplaces are designed to be easily integrated into existing layouts, providing versatility in home design. Moreover, the straightforward maintenance schedule, combined with high-quality materials, ensures long-lasting performance and reliability.

In summary, the Napoleon Fireplaces GT8N and GT8P represent the ideal blend of style, efficiency, and advanced technology. Whether looking for a traditional or contemporary aesthetic, these fireplaces meet the diverse needs of homeowners while providing exceptional warmth and comfort. With features that prioritize both functionality and safety, Napoleon continues to set the standard in the world of gas fireplaces.