Napoleon Fireplaces GVFL30N, GVFL30P, GVFL18 Installation, Installing in AN Unvented Application

Page 8

8

3.0INSTALLATION

3.1INSTALLING IN AN UNVENTED APPLICATION

!WARNING

BARRIERS SUCH AS THE BOTTOM OF A GLASS DOOR FRAME PLACED IN FRONT OF A GAS LOG SET CAN CHANGE THE AIR FLOW CHARACTERISTICS OF THE APPLIANCE WHICH IN TURN CAN CAUSE THE APPLIANCE TO CARBON OR OVERHEAT AND MALFUNCTION.

During manufacturing, fabricating and shipping various components of this appliance are treated with certain oils, films or bonding agents.

These materials may produce smoke and smells as they are burned off during the initial operation of the appliance; possibly causing headaches or eye or lung irritation. This is a normal and temporary occurrence. Simply open a window to ventilate the room during the burn off period.

3.1.1 COMBUSTION AND VENTILATION AIR PROVISIONS

This appliance shall not be installed in a confined space or unusually tight construction unless provisions are provided for adequate combustion and ventilation air.

The National Fuel Gas Code, ANSI Z223.1 / NFPA 54 defines a confined space as a space whose volume is less than 50 cubic feet per 1,000 Btu per hour (4.8 m3 per kw) of the aggregate input rating of all appliances installed in that space and an unconfined space as a space whose volume is not less than 50 cubic feet per 1,000 Btu per hour (4.8 m3 per kw) of the aggregate input rating of all appliances installed in that space.

Rooms communicating directly with the space in which the appliances are installed, through openings not furnished with doors are considered a part of the unconfined space.

17.1A

The GVFL 18/24/30 are all rated at 40,000 BTUs per hour and therefore requires a minimum unconfined space of 2,000 cubic feet.

3.1.2 DETERMINING CONFINED OR UNCONFINED SPACE

This appliance shall not be installed in a room or space unless the required volume of indoor combustion air is provided by the method described in the National Fuel Gas Code, ANSI Z223.1 / NFPA 54, the International Fuel Gas Code, or applicable local codes.

To determine the volume of the room where the appliance is to be installed, multiply the width x the length x the ceiling height of that room measured in feet. If any adjoining rooms are connected by grilles or openings such as kitchen pass-throughs, etc., the volume of those rooms may be added to the total.

Multiply the room volume by 1000 and divide this amount by 50 to determine the maximum BTU/hr that the space can support with adequate combustion and ventilation air.

Add the Btu/hr of all fuel burning appliances located within the space such as gas furnace, gas water appliance, etc. Do not include direct vent gas appliances which draw their input and output air from and to the outdoors.

!WARNING

IF THE AREA IN WHICH THE APPLIANCE MAY BE OPERATED IS SMALLER THAN THAT DEFINED AS AN UNCONFINED SPACE OR IF THE BUILDING IS OF UNUSUALLY TIGHT CONSTRUCTION, PROVIDE ADEQUATE COMBUSTION AND VENTILATION AIR BY ONE OF THE METHODS DESCRIBED IN THE NATIONAL FUEL GAS CODE ANSI Z223.1/ NFPA 54 , AIR FOR COMBUSTION AND VENTILATION, OR THE APPLICABLE LOCAL CODE.

IF THE AREA IN WHICH THE APPLIANCE MAY BE OPERATED DOES NOT MEET THE REQUIRED VOLUME FOR INDOOR COMBUSTION AIR, COMBUSTION AND VENTILATION AIR SHALL BE PROVIDED BY ONE OF THE METHODS DESCRIBED IN THE ANSI Z223.1 / NFPA 54, THE INTERNATIONAL FUEL GAS CODE, OR APPLICABLE LOCAL CODES.

W415-0809 / A / 05.10.10

Page 7 Page 9
Image 8
Page 7 Page 9
Contents GVFL18N, GVFL24N GVFL30N GVFL18P, GVFL24P GVFL30PWhat to do if YOU Smell GAS GVFL18 GVFL24 GVFL30Table of Contents Installation Overview Introduction General Instructions General Information Minimum Appliance SizeRating Plate Information Installation Installing in AN Unvented ApplicationCombustion and Ventilation AIR Provisions Determining Confined or Unconfined SpaceRoom ExampleInstalling in a Vented Application Damper Stop InstallationChimney Masonry Factory Built Height ApplianceGAS Piping Andiron and Grate AssemblyFinishing LOG Placement Logo Placement MediaLogo GvflMatch Lighting Instructions Operating InstructionsLighting Instructions For Your Safety Read Before Lighting OperationAdjustments MaintenanceFlame Characteristics Oxygen Depletion Sensor ODS CleaningReplacements Components1011 Trouble Shooting Symptom Problem Test SolutionSymptom Problem Test SolutionPilot Screw To RESEAL. do not Over Torque After Taking Pressure READINGS, beSure to Turn Screws Clockwise Firmly Warranty Napoleon GAS LOG SET Lifetime Limited WarrantyService History 44.1

GVFL18N, GVFL18, GVFL24N, GVFL18P, GVFL30N specifications

Napoleon Fireplaces are renowned for their innovative designs and advanced heating technologies, and their GVFL series is no exception. The GVFL18P, GVFL24P, GVFL30, GVFL18N, and GVFL18 models are built to enhance any living space while providing efficient warmth and ambiance.

One of the standout features of these fireplaces is their advanced firebox technology, which maximizes heat output while minimizing heat loss. This means that even on the coldest winter nights, you can enjoy a cozy environment without excessive energy costs. The design of the GVFL series incorporates a large viewing area, allowing for a spectacular flame presentation that draws you into its warmth.

The GVFL18P and GVFL24P models are particularly versatile, designed for multi-room applications. They feature a powerful fan-forced air distribution system that promotes an even heat dispersion throughout your space, ensuring comfort in every corner. With adjustable flame settings, users can customize their experience from a gentle glow to a roaring fire, depending on mood and need.

For those seeking a more modern aesthetic, the GVFL30 boasts a sleek design with an array of finishing options that seamlessly fit contemporary interiors. This model highlights Napoleon’s commitment to both form and function, proving that style doesn't have to sacrifice performance.

In addition, the GVFL series incorporates reliable safety features, such as a heat sensor and automatic shut-off system. This gives homeowners peace of mind, knowing that their fireplace is not only efficient but also safe for family use.

The GVFL18N and GVFL18 are ideal for those who prefer a linear design that can complement various living styles. Both models emphasize simplicity and elegance while delivering powerful heating technology. Their compact size makes them suitable for snug spaces where traditional fireplaces may not fit, ensuring that homeowners can enjoy the beauty and warmth of a fireplace regardless of space limitations.

Moreover, Napoleon Fireplaces emphasize eco-friendliness, with models designed to burn cleanly and efficiently, adhering to regulations that reduce emissions. This environmentally conscious approach appeals to today’s customers who are increasingly aware of their carbon footprint.

In summary, the Napoleon Fireplaces GVFL18P, GVFL24P, GVFL30, GVFL18N, and GVFL18 represent a perfect blend of advanced technology, aesthetic appeal, and safety features. Ideal for any homeowner looking to enhance their living space with warmth and style, these models showcase Napoleon’s dedication to quality and innovation in fireplace design.
Top Page Image Contents