Framing

FIREPLACE VENT CONNECTION

GAS INSTALLATION

1.Install the 3” diameter vent pipe to the ﬁreplace. Secure with 3 screws and ﬂat washers. Seal the joint and screw holes using Mill Pac sealant (W573-0007 not supplied).

2.Install the 5” diameter vent pipe to the ﬁreplace. Attach and seal the joints.

FIGURE 7

Proceed once the vent installation is complete.

Note : All gas connections must be contained within

the ﬁreplace when complete.

1.The ﬁreplace is designed to accept a 3/8” gas supply line. The ﬁreplace is equipped with a 3/8” manual shut-off valve.

2. The access	FIGURE 8
to the gas inlet
is located on the
bottom of the
outer shell.
FIGURE 9	3. The shut off must always be
	3. The shut off must always be
	within the outer shell.
	4. When ﬂexing any gas line,
	support the gas valve so that
	the lines are not kinked.
	5. Check for gas leaks by
	brushing on a soap and
	water solution.
	Do not use open
	ﬂame.

The has been designed to be installed mid-way up an outside wall. When installing this unit close to the ﬁnished ﬂoor, the unit must be raised a minimum of 2” (unobstructed) to allow for full rotation of the control door. It is not necessary to install a hearth extension.

Although the unit ﬁts between studs, most jurisdictions will not allow a “hole” in the warm air envelope of a residential structure. It is recommended to build either an interior or exterior chase with a minimum depth of 7”.

FIGURE 10

FIGURE 11

It is best to frame your ﬁreplace after it is positioned and the vent system is installed. Use 2x4’s and frame to local building codes.

Note: In order to avoid the possibility of exposed insulation or vapour barrier coming in contact with the fireplace body, it is recommended that the walls of the ﬁreplace enclosure be “finished” (ie: drywall/sheetrock), as you would finish any other outside wall of a home. This will ensure that clearance to combustibles is maintained within the cavity.

FIGURE 13

FIGURE 12

W415-0619 / A /08.09.07

GT8N, GT8P specifications

Napoleon Fireplaces has long been recognized as a leader in the heating industry, and the GT8N and GT8P models embody their commitment to innovation, efficiency, and style. These fireplaces are designed to provide not only warmth but also a striking aesthetic that complements various interior designs.

The GT8N and GT8P are part of Napoleon's renowned series of gas fireplaces, which focus on delivering a superior heating experience while maintaining ease of use. One of the standout features of these models is their impressive thermal efficiency, which helps to reduce energy costs while providing consistent heat output. With an energy-efficient design, the GT8N and GT8P ensure that homes remain cozy during the harshest of winters.

Both models offer a range of customizable options to suit individual preferences. The GT8N features a traditional design with classic styling, while the GT8P is more contemporary, boasting a sleek, modern look. The extensive selection of finishing materials, including various trim options and media placements, allows homeowners to customize their fireplace to seamlessly fit into their living spaces.

One of the most innovative technologies featured in the GT8N and GT8P is the advanced heat distribution system. This allows for optimal circulation of warm air throughout the room, ensuring that heat is evenly dispersed and preventing cold spots. The fireplaces are equipped with variable-speed fans that can be adjusted according to the desired heat output, providing flexibility for different situations.

Safety is a top priority in the design of the GT8N and GT8P. Both models come equipped with protective features, such as a built-in safety system that detects any irregularities in operation. Additionally, the fireplaces utilize a sealed combustion system, drawing air from outside for combustion, which minimizes the impact on indoor air quality.

Another key characteristic of the GT8N and GT8P is their ease of installation and maintenance. These fireplaces are designed to be easily integrated into existing layouts, providing versatility in home design. Moreover, the straightforward maintenance schedule, combined with high-quality materials, ensures long-lasting performance and reliability.

In summary, the Napoleon Fireplaces GT8N and GT8P represent the ideal blend of style, efficiency, and advanced technology. Whether looking for a traditional or contemporary aesthetic, these fireplaces meet the diverse needs of homeowners while providing exceptional warmth and comfort. With features that prioritize both functionality and safety, Napoleon continues to set the standard in the world of gas fireplaces.