Napoleon Fireplaces EF36H, EF34H manual Operation, Remote Control, Flame Effect, Maintenance

Page 5
OPERATION

5

OPERATION

REMOTE CONTROL

This fireplace is supplied with a radio frequency remote control. This remote will function up to 20 feet away from the fireplace.

The heater may emit a slight, harmless odour when first used. This odour is a normal condition caused by initial heating of internal heater parts. Thereafter, any odour is normally the result of household dust settling on the heater element.

1.Turn the main power on at the control panel.

2.Using the hand held remote, turn the power on at the remote. If the unit does not turn on, you will need to syn- chronize the codes.

To synchronize the codes:

Press and hold the on button on the hand held remote. Press the learn button on the control panel. See CON- TROL PANEL on page 9. Simultaneously hold both but- tons in for approximately 5 seconds.

To change the code on the transmitter:

a)Press the button under the battery compartment lid on the transmitter.

b)Remove the battery from the transmitter and turn "off" the main power on the control panel.

c)Wait 5 seconds and reinstall the battery and turn "on" the power.

d)While pressing the "on" button on the hand held re- mote, press the "learn" button on the control panel. See CONTROL PANEL on page 9.

e)Hold both in for approximately 5 seconds.

3.To turn the unit off, use either the remote or main power button on the control panel or the manual on/off button on the control panel.

4.The thermostat, located on the lower control panel, is used to control the temperature of the room. To increase the temperature, turn the dial clockwise.

FLAME EFFECT

The flame generator has a random modulating control which causes the flame effect to speed up and slow down sporadically. This action creates the realistic flame ap- pearance and can not be modified.

MAINTENANCE

Bulb Replacement : If you notice the flame look is darker on one side of the fireplace, check the light bulbs to en- sure that one has not burned out.

Bulb must be replaced with a MAX 60 watt incandes- cent clear light bulb.

1.To replace the bulb, turn the circuit breaker off or unplug the appliance.

2.Open the lower louvres.

3.Detach the light access panel by removing the four screws.

4.Replace the burned out light bulb using a new 60 watt clear incandescent bulb.

5.Replace access panel.

6.Turn on the power or plug the appliance back in.

7.Turn on the main power and test.

W415-0405 / B / 03.25.04

Page 4 Page 6
Image 5
Page 4 Page 6
Contents FOR YOUR SAFETY EF36HPLEASE RETAIN THIS MANUAL FOR FUTURE REFERENCE TABLE of CONTENTSNAPOLEON Light bulbs are NOT covered by the warrantyISO 9001 2000 Quality Assurance Certificate LOCATINGYOUR ELECTRIC FIREPLACE IMPORTANT INSTRUCTIONSEF34 DIMENSIONS EF36 DIMENSIONS 19.SAVE THESE INSTRUCTIONSMAINTENANCE REMOTE CONTROLOPERATION FLAME EFFECTMANTEL FINISHINGCLEARANCE TO COMBUSTIBLES FRAMING AND FINISHINGEF36 EF34Corner Installation Top View Front View Corner Installation Top View Front ViewLOG INSTALLATION COLD CLIMATE INSTALLATIONL334 LOUVRE INSTALLATION HEARTHELECTRICAL DIAGRAM LEGEND ELECTRICAL CONNECTIONHARD WIRING CONNECTION Electric DiagramREPLACEMENT PARTS REPLACEMENTSEF34 ACCESSORIES EF36 ACCESSORIESW415-0405 /B SYMPTOM TROUBLE SHOOTING GUIDEPROBLEM TEST SOLUTION
Related manuals
Manual 12 pages 24.46 Kb

EF36H, EF34H specifications

The Napoleon Fireplaces EF36H is a remarkable addition to any home, combining cutting-edge technology with stylish design to enhance both warmth and ambiance. This highly efficient gas fireplace is designed for modern living spaces, offering a perfect balance of functionality and aesthetic appeal.

One of the standout features of the EF36H is its sleek, contemporary look. The fireplace features a clean face design that allows for a larger viewing area of the flames, creating a stunning focal point in any room. With a heat-output capability of up to 30,000 BTUs, it efficiently warms up to 1,500 square feet, making it ideal for both smaller and larger living areas.

The EF36H is equipped with Napoleon's patented PHAZER™log set, which mimics the natural beauty of real wood logs. This log set, combined with the advanced lighting technology, produces a glowing ember bed that enhances the realistic appearance of the flames. Moreover, the fireplace features a unique Night Light option that produces a soft glow, adding to the cozy ambiance while also providing a source of light at night.

Safety and convenience are top priorities in the design of the EF36H. It comes standard with a safety barrier and an optional wall switch for easy operation. The unit is also compatible with Napoleon's convenient remote control, allowing users to adjust the flame height and heat output from the comfort of their seating area.

In terms of efficiency, the EF36H boasts an impressive AFUE (Annual Fuel Utilization Efficiency) rating, ensuring that it both heats effectively and conserves energy. The 36-inch size is perfect for creating a spacious feel without intruding on the room, offering versatility in placement and installation.

The versatility of the EF36H extends beyond its design, as it can utilize both natural gas and propane, catering to various home requirements. Additionally, it is available in several finishes, allowing homeowners to select the perfect style that complements their interior decor.

With its blend of modern aesthetics, advanced technologies, and high efficiency, the Napoleon Fireplaces EF36H is a top choice for homeowners looking to enhance their living spaces with a powerful and elegant heating solution. Whether for a cozy evening or entertaining guests, this fireplace promises to deliver warmth and style, making it an invaluable addition to any home.
Top Page Image Contents