OPERATOR MAINTENANCE
!WARNING - DANGER:
Disconnect power supply before servicing or cleaning this oven. Safeguard power so it cannot be accidentally restored. Failure to do so could result in dismemberment, electrocution, or fatal injury.
Extensive engineering went into this oven to make it as maintenance free as possible. There is no lubrication required.
However, to achieve the maximum efficiency of the oven, it is necessary to keep it clean. For cleaning instructions see page 10. The frequency listed is only the factory’s recommendations. Your use and type of products will actually determine the frequency of cleaning.
If the oven fails to operate, check the circuit breaker to be sure it is turned on. Also check the fuses on the back panel to be sure that they are good before you call the Authorized Service Agency. The name and phone number of the Authorized Service Agency should be located on the oven, or contact the factory at (260)
PREVENTIVE MAINTENANCE
Although this oven has been designed to be as trouble free as possible, periodic Preventive Maintenance is essential to maintain peak performance. It is necessary to keep the motors, fans, and electronics free of dirt, dust, and debris to insure proper cooling. Overheating is detrimental to the life of all the components mentioned.
The periodic intervals for preventive cleaning may vary greatly depending upon the environment in which the oven is operating.
You must discuss the need for Preventive Maintenance with your Authorized Service Agent to establish a proper program.
If there are any questions that the service agent cannot answer, please contact the Lincoln Technical Service department.
INFORMATION ON USE OF OVEN
As explained in “Concepts,” the Impinger® Conveyor Oven functions by directing high velocity streams of heated air directly upon the food products. Because air is the heat source, it is effective even on sensitive foods. Compares to conventional ovens and even convection ovens, the cooking time of products in the Impinger® Conveyor Oven can be as much as two (2) to four (4) times faster. Several factors may affect the cooking time of any special products such as:
1.Oven Temperature Setting
2.Conveyor Speed
We encourage you to experiment with the oven by trying different temperature settings and belt speeds.
HOW TO OBTAIN SERVICE
If the oven fails to operate, check the circuit breaker to be sure it is turned on. Also check the fuses on the back panel to be sure that they are good before you call the Authorized Service Agency. The name and phone number of the Authorized Service Agency should be located on the oven, or contact the factory at (260)
FUNCTIONS
THERMAL
The CounterTop unit includes a “safety thermal
In order to avoid a hazard due to inadvertent resetting of the thermal cutout, this ! CAUTION: appliance must not be supplied through an external switching device, such as a timer or connected to a circuit that is regularly switched on and off by the utility.
CounterTop - 1300 Series Ops Manual | 11 |
