Glowing Embers, Logo Placement | Napoleon Fireplaces BGD48N, BGD48P

4.Place the small branch of log#5 into the notch on log#3. The notch on the charred edge of log#5 sits on the outer left grate post.

GLOWING EMBERS

Tear the embers into pieces and place along the front row of ports covering all of the burner area in front of the small logs (#2 & #3). Care should be taken to shred the embers into thin, small irregular pieces as only the exposed edges of the ﬁ bre hairs will glow. The ember material will only glow when exposed to direct flame; however, care should be taken to not block the burner ports.

Blocked burner ports can cause an incorrect ﬂ ame pattern, carbon deposits and delayed ignition. PHAZERTM logs glow when exposed to direct ﬂ ame. Use only certiﬁ ed "glowing embers" and PHAZERTM logs available from your Napoleon® dealer.

5.Place the small end of log#6 into the front notch of log#4. Place the locating hole in the large end of log#6 onto the locating pin on top of log#2.

LOGO PLACEMENT

Remove the backing of the logo supplied and place on the glass viewing door, as indicated.

½"

LOGO

FIGURE 42

½"

6.Place log#7 onto the pin located on top of log#6. The log should sit in the notch on log#2, and the bottom should rest on the outer right grate post.

7.Place the large end of log#8 into the rear notch of log#4.

The small branch of log#8 sits in the notch located on top of log#1.

#10

LOUVRE INSTALLATION

The protective wrap is best removed when the assembly is at room temparature but this can be improved if the assembly is warmed, using a hair dryer or similar heat source.

FIGURE 43

8.Place log#9 onto the grate as though it had burnt off log#5. Place log#10 onto the locating pin on log#1. Again, log#10 should be aligned as though it has burnt off of log#7.

CHARCOAL EMBERS

Randomly place the charcoal embers along the front and sides of the log support tray in a realistic manner. Fine dust found in the

bottom of the bag should not be used.

VERMICULITE

Sprinkle vermiculite around the charcoal embers.

Note: Both charcoal embers and vermiculite are not to be placed on the burner.

W415-0326 / C / 11.23.07

HINGE

CLIP

SLOT

TAB

SLOT

UPPER LOUVRES

Insert the louvre tabs into the slots located at the top left and right cor- ners of the unit.

LOWER LOUVRES

Insert the hinge clips into the slots located at the bottom left and right corners of the unit.

To remove the louvres, pull the back tabs of the clips forward, while pushing the louvre assembly back. Lift the clip.

BGD48N, BGD48P specifications

Napoleon Fireplaces has long been a name synonymous with quality and innovation, and their BGD48N and BGD48P models are prime examples of their commitment to excellence. These fireplaces serve as a beautiful focal point in any home while providing efficient heating solutions.

The BGD48N features a classic design that echoes the elegance of traditional fireplaces. With its wide viewing area, it delivers an impressive display of flames, creating a warm and inviting atmosphere. The BGD48P, on the other hand, offers a more contemporary aesthetic, featuring clean lines and a sleek facade that complements modern decor. Both models are built with high-quality materials and craftsmanship, ensuring durability and longevity.

One of the key technologies integrated into these fireplaces is the advanced heat management system, which efficiently distributes warmth throughout the room without overheating the unit. This system uses a combination of convection and radiant heat, ensuring that the space is evenly warmed while maximizing fuel efficiency. The incorporation of a ceramic glass front allows for optimal heat retention and provides an unobstructed view of the flickering flames.

The BGD48N and BGD48P are powered by Napoleon's innovative firebox technology, which permits a variety of fuel options, including natural gas and propane. This flexibility allows homeowners to choose the heating source that best fits their needs and preferences. Additionally, these models are equipped with a powerful fan system that enhances heat circulation, thereby increasing overall efficiency.

Safety and convenience are paramount in the design of these fireplaces. Each model comes with a straightforward control panel, allowing users to easily adjust the temperature and flame height. An automatic shut-off feature ensures peace of mind, providing an added layer of safety for families. The inclusion of easy-access maintenance features also makes cleaning and upkeep a breeze.

With their combination of classic styling, modern technology, and user-friendly features, Napoleon Fireplaces BGD48N and BGD48P models stand out in the market. They offer a sophisticated heating solution that not only enhances ambiance but also improves energy efficiency. Whether you are seeking a traditional touch or a modern aesthetic, these fireplaces cater to diverse tastes, making them an excellent investment for any homeowner looking to elevate their living space.