Napoleon Fireplaces EF30G manual Ember bed bulb replacement, Cleaning

Page 18

18

6.1.3Remove spring clip. Hold socket and pull out old bulb.

6.1.4Hold socket and push in new bulb (DO NOT exceed wattage). Replace spring clip.

6.1.5Repeat steps 3 and 4 for the second bulb.

6.1.6Insert bottom edge of removed cylinder half into bottom drum track.

Gently squeeze drum cylinder until its top edge fit into top drum rack.

Reattach the screw that was previously removed.

6.1.7Secure the backplate to the main appliance by reattaching the 7 screws removed.

FIGURE 6.1.2

FIGURE 6.1.6

6.2ember bed bulb replacement

6.2.1Remove the 7 screws from the bottom half of the back of appliance as illustrated. Remove back plate.

6.2.2Locate the ember bed bulbs which are underneath the flame generation cylinder drum.

6.2.3Remove spring clip. Hold socket and pull out old bulb.

BACK PLATE Mantel

Back View of Insert

2 Screws

2 Screws

On The

On The

Side

Side

3 Screws On The Back

FIGURE 6.2.1

LOCATE THE EMBER BED BULBS

Flame Generation

Cylinder Drum

Bulbs with Spring Clips

FIGURE 6.2.2

6.2.4Hold socket and push in new bulb (DO NOT exceed wattage or handle with bare hands).

6.2.5Repeat steps 3 and 4 for the second bulb.

6.2.6Secure the back plate to the main appliance by reattaching the 7 screws that were previously removed.

EMBER BED BULB

REPLACEMENT

FIGURE 6.2.4

6.3cleaning

6.3.1The glass is cleaned in the factory during assembly. During shipment, installation, handling, etc. the glass surface may collect dust particles. These can be removed by buffing lightly with a clean dry cloth.

6.3.2To remove fingerprints or other marks, the glass can be cleaned with a damp cloth using a good quality household glass cleaner. The glass should be completely dried with a lint free cloth or paper towel.

6.3.3In the event of glass breakage, vacuum all remaining glass pieces with a shop vac. DO NOT VACUUM

WHILE PIECES ARE HOT. Replace glass only with replacement part specifically for this appliance.

Never substitute material. Only fully tempered safety glass may be used on this appliance.

W415-0760 / 12.19.08

Image 18
Contents EF30G Table of contents IntroductionWarranty Conditions and LimitationsPrecautions General instructionsListing approvals EF30GLocating appliance DimensionsUnpacking and testing appliance Not CoverElectrical requirements Grounding applianceHardwire installation Electric DiagramW415-0760 Minimum clearance to combustibles InstallationBefore Installation New construction or renovationInstalling the appliance Glass ember installationGlass Front Bottom Tray Screws Thermostat and thermal sensor installation Framing Finishing checklist Minimum mantel clearancesOperating instructions Plug in your electric applianceRemote control Maintenance Flame generation bulb replacementEmber bed bulb replacement CleaningReplacements Required to Honour the ClaimREF no EF30S Description Troubleshooting

EF30G specifications

The Napoleon Fireplaces EF30G is a stunning addition to any home, combining cutting-edge technology with sophisticated design. As part of Napoleon’s high-quality fireplace line, the EF30G boasts a range of features that enhance both aesthetics and functionality.

One of the most notable characteristics of the EF30G is its impressive heating capacity. With a powerful output, this fireplace can efficiently warm up spaces of varying sizes, ensuring comfort during the cold months. The unit’s 30-inch design is perfect for both contemporary and traditional interiors, offering a sleek and elegant appearance that complements any décor.

A standout feature of the EF30G is its advanced heat management system. Equipped with a high-efficiency burner, this fireplace generates warmth while minimizing energy consumption. The Eco-Friendly technology ensures that the fireplace operates at peak efficiency, which not only saves on utility bills but also reduces environmental impact.

The EF30G also includes customizable flame settings that can be adjusted according to personal preference. With a realistic flame presentation that mimics the look of traditional wood-burning fireplaces, it offers the ambiance of a natural fire without the hassle of wood. The fireplace includes various media options, allowing homeowners to choose from logs, crystals, or stones to further personalize their fire’s appearance.

In terms of safety, the EF30G is designed with a range of safety features. The unit boasts a heat-resistant glass that remains cool to the touch, preventing accidental burns. The built-in safety shut-off function ensures peace of mind, automatically turning off the fireplace in case of an overheating situation.

Installation and maintenance of the EF30G are also simplified. The fireplace can be easily integrated into new constructions or retrofitted into existing spaces due to its flexible venting options. With minimal maintenance required, users can enjoy the beauty and warmth of their fireplace without the burdens of extensive upkeep.

Overall, the Napoleon Fireplaces EF30G combines style, efficiency, and safety, making it an ideal choice for anyone looking to enhance their home. Whether for cozy evenings or festive gatherings, this fireplace is sure to be a focal point that provides warmth and elegance for years to come.