Sunbeam’s Total Safety System

Safety auto shut-off

Your Sunbeam Convection Plus Heater is equipped with a safety system that detects any abnormally high temperatures within the heater and automatically cuts power to the heating element, preventing overheating. Once the heater has cooled it will automatically resume normal operation.

Thermal back-up fuse

In addition to this automatic shut-off, your heater contains a thermal back-up fuse to provide additional back-up protection. If the heater is in an overheat situation, the back- up fuse will open, stopping the power flow to the heating element. This fuse cannot be reset, so in the event that the back-up fuse is activated, the heater will need to be replaced.

Instant tip-over cut-out

Your Sunbeam Convection Plus Heater is also equipped with an instant tip over cut-out switch. This switch automatically interrupts the power flow to the heating element when the heater is tilted to a certain angle. If

the heater is tipped over, it will not turn on until it has been placed back in the upright position.

Note: The tip over cut-out switch will activate when the heater is tilted forward, backward or sideways. Care should be taken to ensure your heater remains upright at all times.