Sunbeam Bedding HE2100 Mode button, Fan setting, Power on light, LCD screen, Safety auto shut-off

Page 6

Features of your Compact Oscillating Ceramic Heater

Mode button

Press the mode button to select the desired operating mode:

LOW HEAT, HIGH HEAT AUTO, FAN or STANDBY

Fan setting

Ideal for circulating cool air in summer, the fan setting operates the fan without heat.

Power ON light

Illuminates to indicate that the heater is connected to the power outlet.

LCD screen

The LCD screen displays the current settings including the ambient room temperature, the selected mode, or heat setting.

Safety auto shut-off

The safety auto shut-off system detects any abnormally high temperature variations within the heater and automatically switches it off to prevent overheating.

����

��� ����

����

4

Image 6
Contents Compact Ceramic Oscillating Heater Contents Sunbeam’s Safety Precautions For examination, repair or adjustmentEnsure the above safety precautions are understood Important instructions retain for future use Sunbeam’s Total Safety System Safety auto shut offThermal back-up device Power on light Mode buttonFan setting Safety auto shut-offThermostat dial Oscillation functionElectronic thermostat Ceramic elementUsing your Compact Oscillating Ceramic Heater Setting the electronic thermostatResetting the thermal backup device Using the Oscillation FunctionResetting the safety auto shut-off To reset the heater, follow steps 1 to 3 on thisTroubleshooting Guide Care and CleaningAustralia 1800 025 New Zealand 0800 786 12/05 Australia New Zealand