Troubleshooting, Problem Possible Cause Solution

Troubleshooting

PROBLEM

POSSIBLE CAUSE

SOLUTION

Unit fails to heat up. Red Power	Unit is not plugged in.	Plug power cord into electrical outlet.
Indicator Light DOES NOT
Indicator Light DOES NOT	Unit’s main power is not on.	Press On/Off Switch until it clicks.
illuminate.	Unit’s main power is not on.	Press On/Off Switch until it clicks.
illuminate.
	Household circuit breaker / ground	Reset circuit breaker / ground fault
	fault interrupter has tripped or blown	interrupter, or replace fuse. For
	a fuse.	assistance, contact a licensed electrician.
	Unit is damaged or otherwise in	Immediately cease usage and unplug.
	need of repair.	Contact Consumer Service for
		assistance (see Page 13 for details).
Unit fails to heat up. Red Power	No water in Boiler.	Refer to Adding Water procedure
Indicator Light DOES illuminate;		on Page 8 to fill Boiler.
green Heating Indicator Light DOES
NOT illuminate.
Unit heats up, but fails to steam. Both	Mineral build-up in unit.	Refer to Mineral Build-upsection on
red Power Indicator Light and		Page 11 for cleaning procedure.
green Heating Indicator Light DO
green Heating Indicator Light DO	Unit is damaged or otherwise in	Immediately cease usage and unplug.
illuminate.	Unit is damaged or otherwise in	Immediately cease usage and unplug.
illuminate.	need of repair.	Contact Consumer Service for
NOTE: Always allow sufficient	need of repair.	Contact Consumer Service for
NOTE: Always allow sufficient		assistance (see Page 13 for details).
time for unit to heat up and begin
producing steam.
Steam output is weak or intermittent.	Water level in Boiler is running low.	Refer to Refilling procedure on
		Page 8 to refill Boiler.
	Mineral build-up in unit.	Refer to Mineral Build-upsection on
		Page 11 for cleaning procedure.
Excessive moisture left on floor	Microfiber Pad has become	Remove pad and replace with a
during mopping.	saturated with moisture.	fresh dry one. To purchase
NOTE: It is normal for some		additional Pads, contact Consumer
NOTE: It is normal for some		Service (see Page 14 for details).
amount of moisture to be left		Service (see Page 14 for details).
behind. Allow floor some time to	Boiler has been overfilled.	Filling Boiler with more than 10 oz.
air-dry once mopping is complete.		(300 ml.) of water interferes with
		steam production, resulting in water
		condensation in steam.
		Drain some water out of Boiler.
		Always use included Measuring Cup
		to fill Boiler with correct amount of
		water (see Page 8 for details).
Floor surfaces appear cloudy or	Microfiber Pad is dirty / oversaturated.	Replace pad with a clean dry one.
Floor surfaces appear cloudy or	Microfiber Pad is dirty / oversaturated.	Replace pad with a clean dry one.
streaky after steaming.
streaky after steaming.	Hard water residue on floor.	Switch to distilled water.
	Hard water residue on floor.	Switch to distilled water.

12 ENGLISH

SF-140 specifications

The Vornado SF-140 is a standout model in the world of personal air circulators, designed to provide efficient airflow and enhanced comfort in various indoor environments. With its sleek design and compact size, the SF-140 is perfect for home, office, or any space where air circulation is needed without taking up too much room.

One of the main features of the Vornado SF-140 is its unique Vortex Technology. This innovative technology utilizes a specially designed fan and air ducting system that allows for a powerful yet gentle circulation of air. Unlike traditional fans that simply blow air in one direction, the SF-140 creates a vortex effect that promotes even distribution of air throughout the room. This ensures that every corner receives a refreshingly cool breeze or warm air, depending on the season.

The SF-140 also boasts a two-speed control setting, allowing users to easily adjust the airflow to their preference. Whether you need a gentle breeze for a calm day or stronger airflow for more humid conditions, the SF-140 can accommodate various needs. The integrated quiet operation feature is perfect for use in bedrooms, offices, or any space where noise levels need to be kept to a minimum.

Another characteristic of the Vornado SF-140 is its energy-efficient design. This air circulator is built to operate while consuming less electricity than traditional fans, making it an environmentally friendly option for those looking to minimize energy costs. The stable base ensures that the unit remains secure on any surface, while the lightweight design allows for portability, enabling users to move it from room to room with ease.

In terms of maintenance, the SF-140 is designed with user convenience in mind. The removable front grille is easy to clean, ensuring optimal airflow without the risk of dust buildup.

In summary, the Vornado SF-140 air circulator combines powerful Vortex Technology, adjustable speed settings, and energy efficiency in a compact design, making it a must-have for anyone seeking reliable and effective air circulation in their indoor spaces. With its blend of functionality and stylish appearance, the SF-140 is sure to enhance comfort while keeping energy consumption low.