Resetting Your Vornado Heater

Your Vornado Heater has a multi-level safety shut-off system designed to prevent overheating. Overheating may occur when the inlets or outlet are blocked, a foreign object prevents the blade from turning, or the appliance tips over. If this happens, the safety shut-off system will cut power to the heat element and you will need to manually reset the heater.

1.Set the POWER switch to OFF and unplug the unit.

2.Remove any obstructions.

3.Wait 5 –10 minutes, allowing the unit to cool down.

4.Plug in the unit and place in desired position.

5.Set the POWER switch to ON. Your Vornado Heater should now function normally.

6.If the safety shut-off system repeatedly shuts off your heater or if it will not reset after following the above procedure, DO NOT ATTEMPT TO DISASSEMBLE THE UNIT. Call Vornado Consumer Services Department toll-free at 1-800-234-0604.

OPERATING TIPS

In smaller areas, you might prefer to set the unit in LOW mode. A vortex beam of air will gently keep the air circulating in the room for even, uniform heating.

In larger spaces, you might prefer to set the unit in HIGH mode. A vortex beam of air will gently keep the air circulating in the room for even, uniform heating.

To use the iControl as a personal fan, set the unit to FAN mode.

The iControl, like any other 1500-watt electric heater, draws up to

12.5amps of electric current. If using your iControl on HIGH setting causes your home circuit breaker or fuse to trip, we offer the following suggestions:

Try turning off other electrical appliances that run on the same circuit as your heater.

Run your heater in LOW mode.

Have your electrician add an additional circuit to your home’s electrical system.

When the room temperature is higher than the set temperature it is normal and correct to have little to no heat coming out of the iControl. When the unit is first turned on there is a slight delay before heat will start to be produced.

ALWAYS USE COMMON SENSE WHEN USING THIS AND/OR ANY ELECTRICAL APPLIANCE.

ADVANCED SAFETY FEATURES

TIGHT GRILL SPIRALS

Resists curious fingers.

COOL TOUCH CASE

Safe to touch, even on high heat setting.

AUTOMATIC SAFETY SHUT OFF SYSTEM

If airflow becomes blocked and overheating occurs, power to the heating element and fan is shut off.

TIP-OVER SWITCH PROTECTION

If tipped over, power to the heating element and fan motor is reduced to prevent overheating.

IDEAL 120°F EXIT AIR TEMPERATURE

Warm enough to heat an entire room.

GROUNDED HEAVY-DUTY POWER CORD

Adds durability and a more secure wall connection.

16 Español

Español 17