Vermont Casting 1920 installation instructions Warranty

Page 31

Warranty

Limited 3 Year Warranty

CFM Corporation warrants that this woodburning stove will be free of defects in material and workmanship for a period of three years from the date you receive it, except that the catalyst, thermostat assembly, handles, glass door panels, cement, and gasketing shall be warranted as described below.

Products will repair or replace, at its option, any part found to be defective upon inspection by a CFM Corporation Authorized Dealer. The customer must return the defective part or the stove, with shipping prepaid, to the Authorized Dealer or pay for any Authorized Dealer in-home travel fees or service charges for in-home repair work. It is the dealer’s option whether the re- pair work will be done in the customer’s home or in the dealer’s shop. If, upon inspection, the damage is found to be the fault of the manufacturer, repairs will be authorized at no charge to the customer for parts and/or labor.

Any woodburning stove or part thereof that is repaired or replaced during the limited warranty period will be warranted under the terms of the limited warranty for a period not to exceed the remaining term of the original limited warranty or six

(6) months, whichever is longer.

Limited 1 Year Warranty

The following parts of the woodburning stove are warranted to be free of defects in material and workmanship for a period of one year from the date you receive it: The thermostat assem- bly, handles, glass door panels, cement, and gasketing. Any of these items found to be defective will be repaired or replaced at no charge, upon the return of the part with postage prepaid to a CFM Corporation Authorized Dealer.

Any part repaired or replaced during the limited warranty period will be warranted under the terms of the limited warranty for a period not to exceed the remaining term of the original limited warranty or six (6) months, whichever is longer.

Exclusions & Limitations

1.This warranty is transferable; however, proof of original retail purchase is required.

2.This warranty does not cover misuse of the this stove. Mis- use includes overfiring which will result if the stove is used in such a manner as to cause one or more of the plates to glow red. Overfiring can be identified later by warped plates and areas where the paint pigment has burned off. Overfir- ing in enamel fireplaces is identified by bubbling, cracking, chipping and discoloration of the porcelain enamel finish. CFM Corporation offers no warranty on chipping of enamel surfaces. Inspect your woodburning stove prior to accepting it for any damage to the enamel.

3.This warranty does not cover misuse of the stove as de- scribed in the Owner’s Guide, nor does it cover any stove which has been modified unless authorized by a CFM Cor- poration representative in writing. This warranty does not cover damage to the stove caused by burning salt saturated wood, chemically treated wood, or any fuel not recommend- ed in the Owner’s Guide.

4.This warranty does not cover a stove repaired by someone other than a CFM Corporation Authorized Dealer.

5.Damage to the unit while in transit is not covered by this warranty but is subject to a claim against the common carrier. Contact CFM Corporation Authorized Dealer from whom you purchased your stove or CFM Corporation if the purchase was direct. (Do not operate the stove as this may negate the ability to process the claim with the carrier.)

6.Claims are not valid where the installation does not conform to local building and fire codes or, in their absence, to the recommendations in our Owner’s Guide.

7.The salt air environment of coastal areas, or a high-humid- ity environment, can be corrosive to the porcelain enamel finish. These conditions can cause rusting of the cast iron beneath the porcelain enamel finish, which will cause the porcelain enamel finish to flake off. This warranty does not cover damage caused by a salt air or high-humidity environ- ment.

8.CFM Corporation shall have no obligation to enhance or update any unit once manufactured.

IN NO EVENT SHALL CFM CORPORATION BE LIABLE FOR INCIDENTAL AND CONSEQUENTIAL DAMAGES. ALL IM- PLIED WARRANTIES, INCLUDING THE IMPLIED WARRAN- TIES OF MERCHANTABILITY AND FITNESS, ARE LIMITED TO THE DURATION OF THIS WRITTEN WARRANTY. THIS WARRANTY SUPERCEDES ALL OTHER ORAL OR WRITTEN WARRANTIES.

Some states do not allow the exclusion or limitations of inciden- tial and consequential damages or limitations on how long an implied warranty lasts, so the above limitations may not apply to you. This warranty gives you specific rights and you may have other rights which vary from state to state.

How to Obtain Service

If a defect is noted within the warranty period, the customer should contact a CFM Corporation Authorized Dealer or CFM Corporation if the purchase was direct with the following infor- mation:

1.Name, address, and telephone number of the purchaser.

2.Date of purchase.

3.Serial number from the label on the back.

4.Nature of the defect or damage.

5.Any relevant information or circumstances, e.g., installation, mode of operation when defect was noted.

A warranty claim will then start in process. CFM Corporation reserves the right to withhold final approval of a warranty claim pending a visual inspection of the defect by authorized repre- sentatives.

30000369

31

Page 30 Page 32
Image 31
Page 30 Page 32
Contents Aspen Introduction Table of ContentsAspen, Model SpecificationsChimneys InstallationMasonry Chimneys Masonry Chimneys, cont’d Chimney Connector GuidelinesPrefabricated Chimneys Chimney SizeFreestanding Installations Double-wall Chimney ConnectorsSingle-wall Chimney Connectors Securing the Single-wall Connector To a Masonry ChimneyConnection Through the Fireplace Connection Above the FireplaceWall Pass-throughs Canadian Requirements RequirementsAlternate methods approved by the Nfpa Fireplace Hearth Protection Floor ProtectionCanada Clearance to Surrounding Combustible Materials Mobile Home InstallationSafe Ways to Reduce Clearances Approved Wall shield construction Wall ShieldsAlcove Clearances Fireplace ClearancesFront Clearance All Installations To Combustibles Aspen Clearance ChartStove Installed Stove in Corner Parallel to Wall Install the Outside Air Adapter AssemblyInstall Stove Legs Install the AshlipInstall the Bottom Heat Shield Install the Rear Heat ShieldFlue Collar Reversal Burn Only High-Quality Wood Use the Air Control Setting That Works Best for YouOperation How the Aspen WorksStarting and Maintaining a Fire Conditioning Your Stove Aspen Control Settings Burn Rate Primary Air ControlStart a fire with small, dry kindling Refuel While the Embers Are Still HotSmoke Detectors Ash DisposalCare of the Cast Iron Surface MaintenanceCleaning the Glass Glass ReplacementAdjust the Door Gasket ReplacementCreosote Clean the Primary Air Outlet Annual MaintenanceInside/Outside Location Draft ManagementMasonry Chimney Steel ChimneyFuel Draft TestingPipe & Chimney Layout Single VentingConclusion Negative PressureAspen Woodburning Stove Aspen Woodburning Stove Model Aspen Woodburning Stove Aspen Woodburning Stove Warranty CFM Corporation

1920 specifications

Vermont Castings has long been a beacon of quality and craftsmanship in the world of cast iron products, particularly known for its wood and gas stoves, as well as outdoor grills. Established in the mid-1970s, Vermont Castings quickly rose to prominence for their superior heating efficiency and durability, but it's important to highlight that their iconic brand rests on decades of innovation and tradition.

The Vermont Castings 1920 model is reminiscent of the vintage designs that reflect a commitment to both aesthetics and functionality. This model features a robust cast iron construction, ensuring exceptional heat retention and an impressive lifespan. Cast iron is known for its excellent ability to radiate warmth evenly, making it highly effective for heating spaces.

One of the standout features of the Vermont Castings 1920 is its efficient wood-burning abilities. Equipped with a patented catalytic combustor, this model can achieve impressive efficiency ratings, which translate to fewer emissions and lower wood consumption. This technology not only honors environmental standards but also enhances the overall user experience. The combustor maximizes the burn time, allowing users to enjoy a more extended period of warmth without the need for constant refueling.

The design of the 1920 model pays homage to classic aesthetics, featuring intricate detailing and a timeless finish that complements a variety of interior styles. It's available in multiple colors, allowing homeowners to select a look that best fits their décor. The large glass window on the front lets users enjoy the mesmerizing flames while ensuring the stove remains safe and efficient.

Ease of use is another critical characteristic of the Vermont Castings 1920. It incorporates straightforward controls for adjusting airflow, enabling users to fine-tune the burn rate and optimize heat output. Furthermore, the stove features an easy-to-clean ash pan, making maintenance a breeze.

Overall, the Vermont Castings 1920 model embodies a blend of historical craftsmanship and modern technology, providing an unparalleled heating solution with aesthetic appeal. Its enduring features and innovative attributes ensure that it remains a favorite among those seeking both functionality and style in home heating solutions. Whether in a rustic cabin or a contemporary home, the 1920 model stands out as a testament to the elegance and efficiency that Vermont Castings is known for.
Top Page Image Contents