PRODUCT
FEATURES
LOCATING
STOVE
AIR FOR COMBUSTION AND VENTILATION
6
Operation
This stove is designed to accept all gas log heaters listed in Table 1, page 2. It requires no outside venting or chimney making installation easy and inexpensive. When used without the blower, the stove requires no electricity making it ideal for emergency back- up heat.
Blower Accessory
The stove will accept the GA3700 accessory. The variable blower allows you to select the fan speed you desire. The blower circulates heated air from the stove into the room. Use of blower is optional.
Planning
Plan where you will install the stove. This will save time and money later when you install the stove. Before installation, consider the following:
1.Where the stove will be located. Allow for wall and ceiling clearances (see Installation Clearances, page 10).
2.Everything needed to complete installation.
3.These models CANNOT be installed in a bedroom or bathroom.
4.Proper air for combustion and ventilation (see below).
This heater shall not be installed in a confined space or unusually tight construction unless provisions are provided for adequate combustion and ventilation air.
Read the following instructions to insure proper fresh air for this and other
Today’s homes are built more energy efficient than ever. New materials, increased insulation, and new construction methods help reduce heat loss in homes. Home owners weather strip and caulk around windows and doors to keep the cold air out and the warm air in. During heating months, home owners want their homes as airtight as possible.
While it is good to make your home energy efficient, your home needs to breathe. Fresh air must enter your home. All
Exhaust fans, stoves, clothes dryers, and fuel burning appliances draw air from the house to operate. You must provide adequate fresh air for these appliances. This will insure proper venting of vented
103661