Connect Accessory Devices

1 Set Top Box to TV

Using HDMI

 

A

Connect RF cable from wall to input at back of the cable box.

 

 

Set output switch on set-top box to CH 3 or 4 and tune TV to same

 

 

channel.

 

In some cases, cable box will automatically tune to channel 3 or 4. Just change channels

 

until picture appears.

 

B Connect cable box to TV using HDMI cable.

 

Note: If the accessory device has DVI output only, use a DVI to HDMI adapter cable to

 

connect to the HDMI connector. You need to also connect the audio cable to L and R

 

AUDIO jacks. Next, go to Menu=>Setup=>Source=>Analog Audio In=> and

 

select HDMI.

 

Using RF Cable

 

A

Connect RF cable from wall to input at the back of the cable box.

 

B Use second RF cable to connect the cable box to the TV's antenna input.

 

This connection gives mono sound. For stereo sound use also composite

 

audio/video connection (Refer to panel 3).

 

DVD Player or DVD Recorder to TV

 

2

 

 

 

 

 

 

 

 

 

 

 

 

Using HDMI

 

 

 

 

 

 

 

 

 

 

 

 

A

Connect DVD player/DVD recorder to the TV using HDMI cable.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

B

Turn on TV and DVD Player/DVD recorder. Press CH+ or CH- on remote

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

control to tune to the video supplied by HDMI.

 

 

 

 

 

 

 

 

 

 

 

 

Insert a prerecorded DVD into DVD player/DVD recorder and press PLAY

 

 

 

 

 

 

 

 

 

 

 

 

to verify correct connection.

C

3

DVD Player or DVD Recorder to TV

Using Composite Video Input (YPbPr)

 

 

 

 

A

Insert Component Video connectors into their corresponding jacks on both

 

 

 

DVD player/DVD recorder and TV (Y, Pb and Pr).

 

 

B

Connect red/white audio cables into the audio output jacks on DVD player/

 

 

 

DVD recorder and audio AV inputs on TV.

 

 

C

Turn on TV and DVD player/DVD recorder. Press AV on remote control

 

 

 

until the connected source appears on TV screen.

 

 

 

Insert a pre-recorded DVD into DVD player/DVD recorder and press PLAY to verify

 

 

 

correct connection.

21

Page 29
Image 29
Magnavox 51MP6200D user manual Connect Accessory Devices, Set Top Box to TV, DVD Player or DVD Recorder to TV, Using Hdmi