Teledyne t7000, t700e user manual Leads Addendum, Introduction

Page 3

LEADS Addendum

INTRODUCTION

The LEADS version of Models T700 and 700E software includes support for Dasibi “Dot” serial data commands, operational “Levels”, and for driving external devices via contact closure control outputs. Further an optional bolt-on valve driver assembly allows the control of external valves using these control outputs. Generally a LEADS equipped Model T700 or 700E will be used in conjunction with a XENO data logger that collects and buffers data between the various calibrators, analyzers and met gear at an air monitoring station and a remotely located central data analysis facility.

LEADS is a data collection and analysis system for meteorological and environmental data. It can be used to integrate data and control instrumentation from several different manufacturers. However the first and most prevalent implementation of the LEADS system was done for TNRCC using Dasibi 5008 calibrators. Due to the desire to be backwards compatible with existing LEADS systems the “Dot” commands and “Levels” were added to the M700, M700E, and T700. For more information on the LEADS system please go to http://www.meteostar.com/.

05780A DCN6493

1

Page 2 Page 4
Image 3
Page 2 Page 4
Contents Leads Addendum Page Introduction Leads AddendumFront Panel Displays DOT Commands Generating a GAS Using a Level from the Front PanelLevels Creating and Editing Levels Page Page Option 73, External Valve Driver Page Printed Documents Are Uncontrolled Header
Top Page Image Contents