Recordingmaintenance

Recording copyright material without permission of the copyright owners is usually an infringement. If you wi sh to record copyright material, permission from the copyright owner is necessary. jWIN does not approve of, and cannot be held responsible for, any unlawful use of this machine.

Re cording com pact discs

1.Load a blank cassette.

2.Select CD function.

3.Load the disc to be recorded.

-Select the track number if required.

-For programmed recording, programme the material in advance (as described under PROGRAMMED PLAY ).

-Press CD PLAY button.

4.Press the REC button. The PLAY button is engaged simultaneously and CD recording starts.

5.Press the STOP/EJECT button to stop recording.

Recording from the radio

1.Load a blank cassette.

2.Tune in the radio station to be recorded.

3.Press the REC button to start recording.

4.Press the STOP/EJECT button to stop recording.

When beat is heard

Beat (a high pitched noise) may sometimes be heard during the recording of radio broadcasts.If this occurs, set the BEAT CANCEL switch to the position that reduces the level of the beat noise.

Safeguards against accidental erasure

To protect side A, break out tab (1).To protect side B, break out tab (2) (Fig.8).

To erase or record a protected cassette, cover the tab openings with adhesive tape

(3).

Note:

The REC button cannot be depressed when using a protected cassette.

Cleaning the tape heads

To ensure continued high performance , use a cleaning tape (available f rom your local audio dealer) to clean the head block of the deck after about every 10 hours of use

Cleaning the unit

Clean the outside of the unit with a clean soft cloth, mois tened with lukewarm water. Do not use benzene, thinner, or alcohol since they will mar the finish of the surfaces.

Cleaning the CD player lens

The lens should never be touched. If dust is on the lens, blow it off using a camera lens blower. (Fig.

9). (Consult your dealer.)