Sunbeam SC7500 Safety Precautions for your Eco Mop, Safety Precautions for Your Sunbeam ECO MOP

Page 4

Safety Precautions for your Eco Mop

SAFETY PRECAUTIONS FOR YOUR

SUNBEAM ECO MOP.

The Sunbeam Eco Mop is intended for domestic household use only.

Only use the attachments supplied with the Eco Mop. Others may cause hazards.

Always unplug the mop from the power outlet when filling with water.

Do not add detergents, chemicals, aromatic products, or solutions of any kind when filling the mop with water as this may damage the mop or make it unsafe for use.

The mop is switched on and heating once connected and turned on at the power outlet, even if the steam on/off switch is in the off position ().

Always use the tray when heating or cooling or at any time the mop is stationary for more than 10 seconds, to avoid damage to surfaces. Should calcification occur, the white ‘halo’ effect can be removed using a decalcifying product or with a few drops of vinegar applied directly to the area.

Do not direct the steam jet toward people or pets as this could be harmful.

Do not direct steam toward equipment containing electrical components, such as the interior of ovens. It could damage the equipment and may cause serious injury.

The safety pressure valve will automatically activate if the steam pressure becomes too high in the steam chamber. This can be prevented by regular cleaning.

Do not touch the lower part of the mop or the attachments when the mop has been in use as these parts will be hot. Allow to cool before handling.

Care must be taken when cleaning polished wooden floor boards. Do not use the Eco Mop on any unsealed wooden flooring, including high traffic areas where the protective coating may be worn down, as the steam may penetrate and damage the wood. Steam may also affect flooring that has been treated with wax as it may be removed by the heat of the steam, leaving the surface dull. If unsure, spot test a small inconspicuous area before proceeding.

Always check the manufacturer's care and cleaning instructions before using the Eco Mop to clean fabrics, soft furnishings and other surfaces, where possible.

Do not use the utility head on any surface without a cloth fitted as it may damage or scratch the surface.

Always ensure the mop is unplugged and completely cool before cleaning the steam chamber.

Allow the mop to cool completely before storing.

2

Image 4
Contents Eco Mop Page Contents Important instructions retain for future useSafety Precautions for your Eco Mop Safety Precautions for Your Sunbeam ECO MOPFor examination, repair or adjustment Sunbeam’s Safety PrecautionsEnsure the above safety precautions are understood Features of your Eco Mop Mop handle Water tank cap Large 1 litre water tankInstant steam generator Steam chamber nozzleMaximum water level indicator Upright handle Safety pressure valveLong 5 metre power cord Securing clips To secure an alternative cloth to the utility headAttachments and Accessories Using your Eco Mop Using the Eco MopBefore first use Filling the Eco Mop with waterUsing a non-elasticised cloth Using the other attachmentsUsing the utility head and upholstery cloth Follow steps 2 to 9 onUsing the steam jet nozzle Using the squeegeeUsing the round brush Upright useCare and Cleaning Cleaning the steam chamberAfter each use Unblocking the steam outletCleaning the cloths Cleaning the mop exteriorPage Page Australia New Zealand