Listen Technologies LR-400, LR-300 manual LR-500 Squelch, Squelch Programming Instructions

Page 18

LR-500

LR-500 Squelch

Squelch

The purpose of squelch is to mute the audio output of your receiver when the

signal from the transmitter is turned off or is too weak to be received. Without squelch you would hear radio noise in your earphone. The squelch on your receiver can be adjusted so that it will mute the audio on different RF signal strengths. This is useful as follows:

•To ensure that users don’t hear transmissions from other transmitters, set the squelch setting to the highest level that doesn’t squelch the receiver.

•If the receiver is going to be close to the transmitter (i.e. in a classroom), setting the squelch setting high so that when the transmitter is turned off it immediately squelches and ignores transmitters in other rooms.

•If you are in an area that has a lot of inference, you may want to set the squelch setting to a high setting to ensure the interference is not picked by the receiver.

•If you need the maximum amount of range, you may want to consider setting the squelch setting to a low level (0, 1 or 2).

CAUTION: When setting the squelch level low the reliability of squelch function is comprised. This will cause radio noise to be heard in the earphone and there is a possibility of hearing damage.

Squelch Programming Instructions

Squelch Programming

To enter Squelch programming mode

•Turn the unit off

•Press and hold the seek button; while still holding seek turn the ON/OFF dial to turn the unit on.

•Release the seek button when the Listen name disappears and a two digit display is seen.

To adjust the Squelch level

•Use the Channel UP and DOWN buttons to raise or lower the squelch sensitivity settings.

•Lower numbers mean that a less powerful and possibly noisy signal will be heard, but you can have a longer range.

•Higher numbers mean that a more powerful signal with no noise will be heard, but you may have a shorter range.

•Once the desired squelch setting is found, press “seek” to exit the squelch programming mode.

Squelch setting 00 is no squelch; this effectively disables Squelching capabilities of the receiver. Squelch setting 20 is maximum squelch sensitivity; you must have a very strong and stable RF signal for the unit to not engage the squelch feature.

Adjusting the squelch setting will keep your LR-500 receiver from picking up noise when the transmitter is not transmitting, or when you lose the signal by being out of range or if encountering interference.

Note: For squelch settings 1-3, the squelch function is slow which allows for maximum transmission range. For squelch settings 4-20 the squelch function is fast to ensure little radio noise is heard during the squelch function.

(The Listen SQ™ feature is not squelch, please refer to page 45 for information on Listen SQ™).

14

Page 17 Page 19
Image 18
Page 17 Page 19
Contents Page Page Page Page Receivers Table of Contents Page Page Page LR-500 Table of Contents LR-500 Package Contents LR-500 Specifications Architectural SpecificationsBattery Compartment LR-500 Quick ReferenceLR-500 Setup Instructions Remove the productSelect Channels LR-500 Operation Instructions Make Sure the Unit is OnTo Lock into Only One Channel LR-500 Programming Instructions Locking Out Unwanted ChannelsLR-500 Squelch Squelch Programming InstructionsLR-500 Charging Batteries LR-500 Wall Transformer Operation Page Page Page Page LR-400 Table of Contents LR-400 Package Contents LR-400 Specifications Specification LR-400-072 LR-400-216LR-400 Quick Reference LR-400 Setup Instructions See page 29 for squelch and programming information LR-400 Operation Instructions To Lock into Only One Channel LR-400 Squelch LR-400 Charging Batteries LR-400 Wall Transformer Operation Page Page Page LR-300 Table of Contents LR-300 Package Contents LR-300 Specifications Specification LR-300-072LR-300 Quick Reference LR-300 Setup Instructions Red LED will illuminate when on Earphone/Headset jack LR-300 Operation Instructions LR-300 Charging Batteries LR-300 Wall Transformer Operation Channel Selection Listen SQ SQ SummaryRF Reception Maximization Strategies MHz Compatibility Chart Comtek Williams Gentner Telex DrakeCSI AVR Troubleshooting LR-300, LR-400, LR-500 Receivers TroubleshootingTroubleshooting Users keep changing channelsCompliance Notice and FCC Statement Compliance NoticeWarranty & Contacting Listen WarrantyOptional Accessories Earphone OptionsPage
Related manuals
Manual 76 pages 36.74 Kb

LR-500, LR-300, LR-400 specifications

Listen Technologies has established itself as a leader in providing innovative audio solutions that enhance communication in various environments. Among their standout products are the LR-400, LR-300, and LR-500, which are designed for assistive listening, language interpretation, and audio distribution. Each of these portable receivers offers unique features, ensuring that users have a seamless experience during presentations, events, and meetings.

The LR-400 is a versatile listening receiver that operates on a wide frequency range. It is specifically engineered for maximum clarity and disturbance-free reception. One of its primary features is the ability to connect directly to a variety of audio sources, making it compatible with numerous sound systems. This device boasts a prominent LCD display, which provides real-time information about channel selection and battery life, enhancing user accessibility. Additionally, the LR-400 supports both mono and stereo audio configurations, catering to different listening preferences and needs.

The LR-300, on the other hand, is specifically built for personal listening purposes, often utilized in classrooms, theaters, and guided tours. It is lightweight and compact, designed for ease of use and portability. One of the LR-300’s standout features is its long battery life, allowing for extended use without the need for frequent recharging. Users can easily adjust the volume for optimal sound levels, ensuring they can fully engage with the presented audio without compromising comfort. The LR-300 can also be equipped with various headphones and earphones, providing flexibility to suit individual preferences.

Finally, the LR-500 expands on the capabilities of its predecessors with advanced technology aimed at improving audiology experiences. It offers a digital communication protocol that significantly enhances audio quality while minimizing interference. The LR-500 is particularly suitable for professional settings, such as conferences and multinational events, where language interpretation is required. With multiple channel options, it allows participants to select their preferred language effortlessly. Its robust design ensures durability, making it suitable for frequent travel and usage in diverse environments.

In conclusion, the LR-400, LR-300, and LR-500 receivers from Listen Technologies exemplify the company's commitment to delivering high-quality audio solutions. Each device is equipped with advanced features and technologies that address specific user needs, whether for personal listening, language interpretation, or professional audio distribution. With their reliability and performance, these receivers enhance communication and accessibility in various settings, ensuring that every voice is heard loud and clear.
Top Page Image Contents