Majestic Appliances 2490 Corner Parallel Installations, 700mm 430mm 650mm 520mm 280mm 470mm

Vermont Castings Resolute Acclaim

Distance from the Center of the Flue Collar to the Wall in Top-Exit Installations

The information on this page is helpful in planning stove placement for top-exiting installations, particularly those installations with chimneys that pass through the ceiling. However, this is not a clearance chart. Final stove clear- ances must adhere to the guidelines stated in the Clearance Chart on Page 8.

Resolute Acclaim: WITHOUT Stove and Chimney Connector Heat Shields

	Unprotected Surfaces				Protected Surfaces
			Corner				Corner
Parallel Installations			Installations**	Parallel Installations			Installations**
Side (A)		Rear (B)	Corner (C)	Side (D)		Rear (E)	Corner (F)
27¹⁄₂”		26”	25¹⁄₂”	20¹⁄₂”		15”	18¹⁄₂”
(700mm)		(660mm)	(650mm)	(520mm)		(380mm)	(470mm)

A

*

B

C

*

D

E

F

ST608

*This distance, from the center of the flue collar to the front edge of the hearth, is the same for all installations on this page: 35” in the United States and 37” (940mm) in Canada.

Resolute Acclaim: WITH Stove and Chimney Connector Heat Shields

	Unprotected Surfaces				Protected Surfaces
			Corner				Corner
Parallel Installations			Installations**	Parallel Installations			Installations**
Side (A)		Rear (B)	Corner (C)	Side (D)		Rear (E)	Corner (F)
27¹⁄₂”		17”	25¹⁄₂”	20¹⁄₂”		11”	18 ¹⁄₂”
(700mm)		(430mm)	(650mm)	(520mm)		(280mm)	(470mm)

A

B

C

D

E

F

ST608a

**To locate center of flue collar for corner installation, add 10¹⁄₂” (270mm) to the clearance distance from stove corner to wall. Mark off the resulting distance from the corner along both walls. Next, measure the same distance from these two points out from the walls. These last two measurements will meet at a point representing the center of the flue collar. Refer to the diagrams above.

2000893 15