Majestic Appliances 2490 Minimum Wall Shield Requirements for Common Installations

Vermont Castings Resolute Acclaim

Minimum Wall Shield Requirements for Common Installations

A

B

A = 48” (1220mm) B = 36” (910mm)

ST602

A	A = 26” (660mm)
B	B = 44’ (1120mm)
	C = 36” (910mm)
D	D = 48” (1220mm)
C	E = 1” (25mm)
E
	ST605

Fig. 16 A rear-exit stove with reduced rear wall clearance only.

	F		A = 26” (660mm)
			B = 49” (1230mm)
A	A	C	C = 44” (1120mm)
			D = 36” (910mm)
		B	E = 1” (25mm)
		D	F = 23” (580mm)
E		E
			ST604

Fig. 17 A top-exit stove with 90° elbow and no stove or connector heat shields. Note clearance between chimney connector and ceiling.

A = 26” (660mm)

H

HB = 23” (580mm)

A	B	C	C = 44” (1120mm)
E			D = 36” (910mm)
			E = 11” (280mm)
F		G
			F = 43” (1090mm)
D		D
			G = 47” (1190mm)
			H = 1” (25mm)
H		H

ST603

Fig. 18 A top exit stove with heat shields on both the stove and chimney connector. Reduced rear and side wall clear- ances. The chimney connector heat shield must be exactly 28”. Note that rear and side wall shields meet at corner.

Fig. 19 A top-exit stove with a wall shield only no pipe or stove heat shields). A 26” wide section of rear wall shield must be centered behind the connector.

				A = 26” (660mm)
				B = 44” (1120mm)
A	A		B	C = 36” (910mm)
				D = 11” (280mm)
D				E = 43” (1090mm)
E		F
				F = 49” (1230mm)
C			C
				G = 1” (25mm)

G

G

ST606

Fig. 20 A top-exit stove with reduced rear and side wall clearances. Note that rear wall shield must extend com- pletely to corner.

				A = 26” (660mm)
B	A	A	B	B = 44” (1120mm
	E			C = 36” (910mm)
	D	D		D = 36” (910mm)
C			C	E = 5” (130mm)
				F = 1” (25mm)
F			F
				ST607

Fig. 21 A top-exit stove with reduced rear and side wall clearance. Wall shields must meet at corner.

14 2000893