About the dispenser.*

About the dispenser.*

Water & Ice Dispenser

(See About the controls with temperature settings & About the control features)

Dispenser tray

WARNING Laceration HazardTo remove Dispenser Tray (Type A Only)WARNING Laceration Hazard

„Never put fingers or any other object into ice crusher discharge opening. Doing so can result in contacting the ice crushing blades and lead to serious injury or amputation

„Use a sturdy glass when dispensing ice. A delicate glass may break and result in personal injury.

If no water is dispensed when the refrigerator is first installed, there may be air in the water line system. Press the dispenser paddle for at least five minutes to remove trapped air from the water line and to fill the water system. To flush out impurities in the water line, throw away the first six full glasses of water.

To remove Dispenser Tray (Type A Only)

„Pull Dispenser Tray out until it stops.

„Locate tab in the center on the bottom and push up.

„Pull Dispenser Tray assembly out.

„Lift metal Dispenser Tray out at center notch to clean.

To remove Dispenser Tray (Type B Only)

„Pull Dispenser Tray out.

To reinstall Dispenser Tray (Type A Only)

„Place the Dispenser Tray cover on top of catch tray and position under the two plastic retainers on either side.

„Center Dispenser tray, and align with center guides.

„Push in until it locks firmly in place.

To reinstall Dispenser Tray (Type B Only)

„Center Dispenser Tray and push in until it snaps in place.

Important Facts About Your Dispenser

„Do not add ice from trays or bags to the door ice maker bucket. It may not crush or dispense.

„Avoid overfilling glass with ice and use of narrow glasses. Backed-up ice can jam the chute or cause the door in the chute to freeze shut. If ice is blocking the chute remove the ice bucket, poke it through with a wooden spoon.

„Beverages and foods should not be quick-chilled in the door ice maker bin. Cans, bottles or food packages in the storage drawer may cause the ice maker or auger to jam.

„To keep dispensed ice from missing the glass, put the glass close to, but not touching, the dispenser opening.

„Some crushed ice may be dispensed even though you selected CUBED ICE. This happens occasionally when a few cubes accidentally get directed to the crusher.

„After crushed ice is dispensed, some water may drip from the chute.

„Sometimes a small mound of snow will form on the door in the ice chute. This condition is normal and usually occurs when you have dispensed crushed ice repeatedly. The snow will eventually evaporate.

To Use the Internal Water Dispenser*

The water dispenser is located on the left wall inside the refrigerator compart- ment.

To dispense water:

To remove Dispenser Tray (Type B Only) Hold the glass against the recess.

To reinstall Dispenser Tray (Type A Only) Push the water dispenser button.

To reinstall Dispenser Tray (Type B Only) Hold the glass underneath the dispenser for 2–3 seconds after releasing the dispenser button. Water may continue to dispense after the button is released.

If no water is dispensed when the refrigerator is first installed, there may be air in the water line system. Press the dispenser button for at least 5 minutes to remove trapped air from the water line and to fill the water system. During this process, the dispenser noise may be loud as the air is purged from the water line system. To flush out impurities in the water line, throw away the first 6 glassfuls of water.

NOTE: To avoid water deposits, the dispenser should be cleaned periodically by wiping with a clean cloth or sponge.

*Select Models Only

10

Page 10
Image 10
GE GFE28HMHES, GFE28HGHBB About the dispenser, Important Facts About Your Dispenser, To Use the Internal Water Dispenser