Harman Stove Company TL2.0 manual 6Mobile Home, Mobile Home Installation

Page 20

6Mobile Home

TL2.0 Woodburning Stove

A. Mobile Home Installation

Mobile home approval - U.S. only.

DO NOT INSTALL IN A MOBILE HOME IN CANADA.

1.An outside air inlet must be provided for combustion air, and must remain clear of leaves, debris, ice, and/or snow. The outside air path must be unrestricted while the appliance is in operation. Use Kit #1-10-856082 to attach to unit.

2.The combustion air intake system must be of metal construction. It must permit zero-clearance to combustible materials, and contain a rodent screen.

3.The appliance must be secured to the mobile home structure by bolting it to the floor. There are holes provided in the pedestal base. Secure with the proper length lag bolts, through the hearth pad and into the home floor.

4.The appliance must be grounded to the metal framing of the mobile home

5.All clearances to combustibles and floor protection requirements must be followed.

6.Follow the vent manufacturer's instructions when installing in a mobile home. Must be connected to a UL103 HT ventillated chimney connector, UL103 HT chimney, and terminal cap with spark arrestor.

7.Use silicone to create an effective vapor barrier at the location where the chimney or other component penetrates to the exterior.

8.Installation shall be in accordance with the Manufactured Home and Safety Standard (HUD) CFR 3280, Part 24

9.The appliance must never be installed in a room designated for sleeping.

10.Burn wood only. Other fuels may generate poisonous gases (carbon monoxide).

11.If unit burns poorly while an exhaust blower (range hood) is operating, increase the supply of combustion air to the appliance

Caution

the structural integrity of the mobile home floor, wall and ceiling/roof must be maintained.

Do NOT cut through:

•Floor joist, wall studs, or ceiling trusses.

•Any supporting material that would affect the structural integrity.

NOTE: The top sections of the chimney must be removable to allow a maximum clearance of 13.5 feet (411cm) from ground level for transportation purposes.

 

Chimney Cap

Chimney

Storm Collar

Sections

Roof Flashing

 

 

Roof

 

Radiation

Attic

Shield

 

Radiation

 

Shield

 

Minimum Air Space

Chimney

with Chimney Listing

Support

Chimney

Connector

Outside

Air

warning

Installation must comply with

Manufactured Home and Safety Standard

(HUD), CFR 3280, Part 24.

warning

Do not install in sleeping room.

20 Dry Seasoned Wood Only!

3-90-08560

Save These Instructions

Page 19 Page 21
Image 20
Page 19 Page 21
Contents Installation and Operation Do Not DiscardFire, Follow The Installation Instructions. Contact Installation Inspection Requirements In YourHouse Fire May Result. To Reduce The Risk Hearth & Home Technologies, IncTable of Contents Mobile Home Approved This appliance is also approved for installation Shop1Listing and Code Approvals If the alarm sounds 2Special Warnings and NotesDesign, Installation & Location Considerations Fire Safety3Getting Started Appliance LocationComponent Locations Pre- Use Check List Fire Risk4Dimensions & Clearances Appliance DimensionsVertical Venting Configuration Clearances To CombustiblesVertical Venting Configuration Horizontal Exit Floor Protection Requirements Floor Protection RequirementsFloor Protection RequirementsChimney Connectors Chimneys and VentingDraft Wall Pass-thrusChimney AN Approved U.S Wall PASS-THROUGHInstalling to a Prefabricated Chimney Existing Masonry ChimneysVenting to a Masonry Chimney Venting to a Masonry Fireplace ChimneyStandard Ceiling Installation with Factory Built Chimney Cathedral Ceiling Installation with Factory Built Chimney Airtight Insulated Clean-out Chimney Breach Fireplace Conversion with Combustible Wall Mobile Home Installation 6Mobile Home7Appliance Set-Up Outside Air AttachmentLeveling the Appliance Optional Cooking GrillOptional Blower Installation Top Air Grill OptionBrushed Stainless Trim Kit Option Use only Blower 1-00-856002 With This ApplianceOperating Instructions Fuel Specifications General Operating InformationAlways wear fire retardant gloves When operating the stove Burning as a Fireplace GratesUser Controls Before Your First FireDisposal of Ashes Creosote- Formation and Need For Removal Service & MaintenanceSeasonal cleaning General Maintenance Procedures Ash RemovalBy User Wear Leather Gloves To Prevent Skin Burns By UserBlower- If installed Disconnect Power Cord Before ServicingFirebox ChimneyReference Materials Service Parts Black W/Pedestal Part number list on followingStocked at depot Hardware Packages Grams Per Hour AsK dealer for HelP50% 60% 70% 80% 90% 100% Use this to choose the right size appliance for your needsLimited Lifetime Warranty Hearth & Home Technologies IncWarranty Conditions This warranty is void ifService & Maintenance Log Page Page Signature of Boxer Proudly Printed On 100% Recycled Paper

TL2.0 specifications

The Harman Stove Company TL2.0 represents an evolution in heating technology, combining efficiency, design, and functionality for homeowners seeking reliable home heating solutions. This innovative stove is designed for those who prioritize both comfort and aesthetics, providing an excellent balance of performance and visual appeal.

One of the standout features of the Harman TL2.0 is its impressive heating capacity. With a heat output that can efficiently warm spaces up to 2,200 square feet, it is perfect for medium to large areas. This capability is paired with a sleek design that allows the stove to seamlessly integrate into various home interiors, making it a stylish addition as much as a functional one.

Incorporating advanced combustion technology, the TL2.0 is engineered to maximize efficiency while minimizing emissions. The stove utilizes a patented "intelligent control board" that enhances burn efficiency by optimizing air-to-fuel ratios in real-time. This not only helps in achieving a cleaner burn but also lowers fuel consumption, making it an eco-friendly choice for consumers.

The TL2.0 is constructed with high-quality materials, ensuring durability and longevity. The robust steel construction not only contributes to its sturdiness but also allows for efficient heat retention and distribution. Additionally, the ceramic glass door provides an elegant view of the flames, creating a warm ambiance in any room.

Another notable characteristic is Harman's commitment to user-friendly operation. The TL2.0 features a straightforward control panel that makes it easy for users to adjust settings and monitor performance. With programmable thermostats and remote control options, homeowners can manage their heating preferences effortlessly.

Safety is also a top priority for Harman, and the TL2.0 includes several built-in safety features such as an automatic shut-off system and a cool-to-the-touch exterior. These features provide peace of mind, especially in homes with children or pets.

Overall, the Harman Stove Company TL2.0 combines advanced technology, sleek design, and safety features that make it a top choice for anyone in the market for a reliable heating solution. It stands out as a model that not only meets but exceeds modern expectations for home heating. Whether for practicality or aesthetics, the TL2.0 is poised to keep homes warm and inviting for years to come.
Top Page Image Contents