Jotul GF100 DV manual Gas Conversion Procedure, #49 for NG #59 for LPG

Page 14

Gas Conversion Procedure

Refer to fig. 27, Illustrated Parts Breakdown, to identify part numbers below.

1.Turn off gas supply to stove.

2.Remove the stove Top Plate (3).

3.Remove the front plate from the stove. Pull the casting straight up and out away from the side panels. Pull the panel upward with one hand while the other pushes against the top of the firebox.

4.Release the Glass Clips (7) at the top of the firebox. Carefully lift the glass panel up and out.

5.Remove the Log Set (8) using care not to scratch or damage logs.

6.Lift out the Front Log Support/Screen (21) and Air Divider (46).

7.LIFT OUT THE BURNER TUBE (10): NOTE: There are no screws securing the Burner Tube to the floor of the firebox.

8.Change the Main Burner Orifice (33). Using a ½” open ended wrench or deep-well socket remove the burner orifice and replace with the appropriate orifice supplied in the kit.

#49 for NG #59 for LPG

9.Adjust the Air Shutter on the Burner Tube (10) to allow for the proper mixing of air and gas. See fig. 16.

1/4 ” open for natural 3/4” open for propane

10.CHANGE THE PILOT ORIFICE: From within the firebox, remove the Pilot Head by pulling it straight up from the pilot base. See fig. 17.

Using the 4 mm allen wrench that is included with the conversion kit, unscrew the pilot orifice (counter- clockwise). Replace with the appropriate orifice:

#51 for natural gas #30 for propane gas

11.Tighten orifice into the base of the pilot assembly. To prevent bypass leaks, be sure the orifice is secured tightly and flush with the base. Replace pilot head by pushing it down onto the pilot base. See fig. 17.

12.Replace the Variable Regulator. Using a Torx T-20 screwdriver, remove the three specialty screws from the front of the valve regulator. See fig. 18.

13.Remove the Regulator Tower, Gasket, white plastic disk, and Spring.

14.Install the new variable regulator tower being sure that the gasket is properly positioned and tighten screws securely.

15.Install the identification labels to the stove so that they can be seen by any person that may be servicing the stove. Label A: apply to back of stove.

Label B: apply to stove’s rating plate.

Small valve Label: apply to valve.

16.Reassemble the stove, apply gas to the system and check for leaks using a soapy water solution.

NEVER USE AN OPEN FLAME TO CHECK FOR GAS LEAKS.

Correct gas pressure is essential for efficient and safe operation of this appliance. Correct gas pressure must be established at the time of installation. For more details, see the Gas Pressure section of this manual (page 17).

ALWAYS REFER TO THE LIGHTING INSTRUCTIONS ON THE INSIDE BACK COVER OF THIS MANUAL WHEN LIGHT- ING YOUR NORDIC QT.

BURNER

TUBE

ORIFICE

AIR SHUTTER

Figure 16.

The Air Shutter should never be less than 1/8” open.

Pilot Head

Orifice

Retainer

Clip

Pilot Base

Figure 17. Pilot orifice removal and replacement.

VARIABLE

REGULATOR TOWER

BE SURE TO REMOVE THE

BLACK RUBBER GASKET

FROM THE VALVE!

MAIN GAS VALVE

Figure 18. Regulator assembly.

14

Page 13 Page 15
Image 14
Page 13 Page 15
Contents Jøtul GF 100 DV Nordic QT Gas Heater Welcome to Jøtul Table of Contents Jøtul GF100 DV Nordic QT Direct Vent Gas HeaterGF 100 DV Nordic QT Specifications Hardware Bag ContentsGeneral Information Glass FrontHearth Requirements Safety InformationLocation Vertical Run Alcove InstallationMinimum Clearances from the Stove to Combustibles See figs Exhaust Restrictor Plate Venting RequirementsVent Restriction Vertical Venting For a Horizontal TerminationHorizontal Termination Wall Thimble requiredWall Shield Installation StandardHorizontal Termination Clearance Inches 30 cm minimumTools required Mobile Home InstallationConversion Kit Contents Gas Conversion Procedure #49 for NG #59 for LPGGas Supply Connection Leak testGas Pressure High Altitude AdjustmentHigh Altitude Orifice Chart Inches water columnTo adjust the air shutter Flame Appearance / Air Shutter AdjustmentDerating Procedure Remote Control Optional Wall Thermostat or Remote ControlLog Set Installation System Check Proper pilot flame appearanceOperation MaintenanceGlass and Gasket Replacement Name of Installer Date of PurchaseGF100 Nordic QT Illustrated Parts Breakdown Illustrated Parts Breakdown GF100 Nordic QTGF100 Nordic QT Parts List Matte Black Blue Black Ivory Green Indigo Jøtul IronPage Page Page Lighting Instructions Control ValveJøtul ASA Jøtul North America

GF100 DV specifications

The Jotul GF100 DV is a standout in the world of gas stoves, combining traditional design with modern technology to deliver both functionality and aesthetic appeal. It is a part of the prestigious Jotul lineup, known for its high-quality craftsmanship and reliability. One of the most notable features of the GF100 DV is its impressive heating capacity, designed to warm spaces effectively while maintaining an efficient burn.

This model boasts a striking cast iron construction which not only contributes to its durability but also enhances its visual appeal. The classic aesthetics of the GF100 DV allow it to blend seamlessly with various decor styles, from rustic to contemporary. The glass front provides a panoramic view of the flames, creating a warm and inviting ambiance in any room.

The Jotul GF100 DV incorporates advanced gas technology, featuring a direct vent system that ensures optimal efficiency. The direct vent design utilizes outside air for combustion, minimizing drafts and improving indoor air quality. This system allows for versatile installation options; it can be vented vertically or horizontally, making it suitable for a variety of home layouts.

Equipped with a variable flame adjustment feature, the GF100 DV enables users to control the heat output according to their needs. The adjustable thermostat allows for consistent temperature regulation, making it a convenient option for any household. Additionally, the remote control capability adds an element of convenience, allowing homeowners to adjust settings from anywhere in the room.

Furthermore, the Jotul GF100 DV is designed with an impressive efficiency rating, providing peace of mind that you are minimizing fuel consumption while maximizing heat output. This not only benefits the environment but also translates to cost savings on energy bills over time.

The stove is available in multiple finishes, allowing users to choose a look that best fits their home’s interior. Whether opting for traditional black or a more contemporary enamel finish, the Jotul GF100 DV remains a prominent feature in any living space.

In summary, the Jotul GF100 DV is a sophisticated gas stove that blends traditional design with cutting-edge technology. Its combination of aesthetics, efficient heating, and user-friendly features make it a top choice for homeowners seeking both beauty and performance in their heating solutions.
Top Page Image Contents