Jotul GF100 DV Alcove Installation, Minimum Clearances from the Stove to Combustibles See figs

0” (0 mm) 25” (635 mm) 2” (50 mm) 3” (76 mm)

10” (254 mm) - for access to Lighting Instruction plate

Stove and Vent Clearance Requirements

Minimum Clearances from the Stove to Combustibles: See figs. 2-4.

Rear:

Ceiling:

Corner:

Right Side:

Left Side:

Minimum Clearances from the Vent Pipe to Combus- tibles:

Horizontal Run:
Off the top of the pipe		2”	(50 mm)
Off the sides and bottom			1”	(25 mm)
Vertical Run:
All sides	1”	(25 mm)

CLEARANCE TO REAR WALL IS= (0”) ZERO CLEARANCE

10” *		3”
(250 mm)	(80 mm)
Left Side	Right Side

*Allow 10” on left side of the appliance for complete access to the lighting instructions and control valve.

Figure 3. Parallel Installation Clearances.

24”or greater

Mantel Depth or Ceiling

12” or less

6” or less

25”		4”or less
635 mm	16”
	406 mm
	9”
	229	6”
	mm
		152 mm

1” deep trim must be 4” (102 mm) off the top of the stove.

2”

50 mm

2”

50 mm

Figure 4. Corner Clearances.

Alcove Installation

Maximum Alcove Depth: 24” (610 mm)

Minimum Alcove Width: 34” (864 mm)

Minimum Ceiling Height: 47” (1094 mm)

Figure 2. Mantel and Trim Clearance specifications.

7