Jotul GF100 DV manual Operation, Maintenance, Glass and Gasket Replacement

Page 20

Operation

Familiarize yourself with the controls of the GF100 Nordic QT. Make sure that anyone else using the appli- ance is also familiar with the controls and operation procedures. Always follow the Lighting Instructions on the inside back cover of this manual and also located on the Rating Plate attached to the burner assembly.

1.Once the pilot is lit, burner operation is controlled by the rocker switch located at the left rear corner of the stove. Use the T-STAT position for the optional thermo- static or remote control functions.

2.During the first few fires, you may notice odor and/or smoke from the stove. This is normal and results from burn-off of manufacturing residue and curing of materials. You may find it helpful to provide addi- tional ventilation and fresh air to alleviate this condi- tion.

3.Condensation may occur on the glass upon each lighting of the appliance. This “fog” will disappear as the appliance heats up.

4.Keep the controls and the area under the appliance free of debris, vacuum this area frequently. Always keep the appliance area clear and free from combus- tible materials, gasoline and other flammable liquids.

If a vacuum is used during any service on the stove, ALWAYS be sure the stove is cold and there are NO hot embers or sparks.

5. Remember, this appliance has a continuous burning pilot flame. Exercise caution when using products having combustible vapors. Always shut-off gas supply while servicing the stove.

6.CAUTION: DO NOT OPERATE THIS APPLIANCE WITH THE GLASS REMOVED CRACKED OR BROKEN. Replace- ment of the glass should be done by a licensed or qualified service person. Use only replacement glass provided by your authorized Jøtul dealer. Never use any substitute materials.

WARNING: OBSERVE CAUTION WITH THE GLASS. THE GLASS PANEL MAY SHATTER UNEXPECTEDLY IF STRUCK WITH AN OBJECT. ALWAYS HANDLE THE GLASS PANEL WITH CARE. WHEN SERVICING THE STOVE ALWAYS PULL THE GLASS ASSEMBLY STRAIGHT UP FOR RE- MOVAL.

7.Clean the glass only when necessary. Wipe surface with a clean, damp soft cloth. Follow with a dry, soft towel as desired. Take care not to scratch the glass surface.

WARNING: DO NOT USE ABRASIVE CLEANERS ON THE GLASS. NEVER CLEAN THE GLASS WHEN IT IS HOT.

Maintenance

The Nordic QT Direct Vent gas stove and its venting system should be inspected before use and at least annually by a qualified service technician.

IMPORTANT:

ALWAYS TURN OFF THE GAS SUPPLY TO THE STOVE BEFORE ANY SERVICE WORK IS PERFORMED ON THE STOVE.

Firebox Cleaning: The firebox should be vacuumed annually to remove any surface build up. Be sure to vacuum or wipe off the pilot assembly and burner orifice and burner tube. Handle the logset carefully as it is very fragile.

Glass Cleaning: Use warm water and a soft cloth. Do not use abrasive cleaning agents or strong detergents on the glass. Be sure the glass is cool before cleaning.

Gasket Inspection: Inspect the glass gasket at least annually. Examine the ribbon gasket for signs of deterio- ration and make sure the gasket has a positive seal. Replace the gasket if it appears worn or damaged. Refer to the replacement parts list on page 24.

Glass and Gasket Replacement

1.Using a nail punch inserted into the perf holes, carefully pry the two glass retainer tabs back. See fig. 27.

2.Peel away all remnants of the old gasket material and clean any adhesive residue off the glass.

3.Peel the paper backing off the replacement gasket to expose the adhesive.

4.Apply the gasket to the panel, wrapping the adhesive side down around the panel edge. See fig. 28.

5.Insert the gasketed glass panel into the frame and use the nail punch to bend the retainer tabs over the edge.

Bend tab with

nail punch

Figure 27. Removal and replacement of the glass panel.

20

Page 19 Page 21
Image 20
Page 19 Page 21
Contents Jøtul GF 100 DV Nordic QT Gas Heater Welcome to Jøtul Table of Contents Jøtul GF100 DV Nordic QT Direct Vent Gas HeaterGF 100 DV Nordic QT Specifications Hardware Bag ContentsGeneral Information Glass FrontHearth Requirements Safety InformationLocation Vertical Run Alcove InstallationMinimum Clearances from the Stove to Combustibles See figs Exhaust Restrictor Plate Venting RequirementsVent Restriction Vertical Venting For a Horizontal TerminationHorizontal Termination Wall Thimble requiredWall Shield Installation StandardHorizontal Termination Clearance Inches 30 cm minimumTools required Mobile Home InstallationConversion Kit Contents Gas Conversion Procedure #49 for NG #59 for LPGGas Supply Connection Leak testHigh Altitude Adjustment High Altitude Orifice ChartGas Pressure Inches water columnTo adjust the air shutter Flame Appearance / Air Shutter AdjustmentDerating Procedure Remote Control Optional Wall Thermostat or Remote ControlLog Set Installation System Check Proper pilot flame appearanceOperation MaintenanceGlass and Gasket Replacement Name of Installer Date of PurchaseGF100 Nordic QT Illustrated Parts Breakdown Illustrated Parts Breakdown GF100 Nordic QTGF100 Nordic QT Parts List Matte Black Blue Black Ivory Green Indigo Jøtul IronPage Page Page Lighting Instructions Control ValveJøtul ASA Jøtul North America

GF100 DV specifications

The Jotul GF100 DV is a standout in the world of gas stoves, combining traditional design with modern technology to deliver both functionality and aesthetic appeal. It is a part of the prestigious Jotul lineup, known for its high-quality craftsmanship and reliability. One of the most notable features of the GF100 DV is its impressive heating capacity, designed to warm spaces effectively while maintaining an efficient burn.

This model boasts a striking cast iron construction which not only contributes to its durability but also enhances its visual appeal. The classic aesthetics of the GF100 DV allow it to blend seamlessly with various decor styles, from rustic to contemporary. The glass front provides a panoramic view of the flames, creating a warm and inviting ambiance in any room.

The Jotul GF100 DV incorporates advanced gas technology, featuring a direct vent system that ensures optimal efficiency. The direct vent design utilizes outside air for combustion, minimizing drafts and improving indoor air quality. This system allows for versatile installation options; it can be vented vertically or horizontally, making it suitable for a variety of home layouts.

Equipped with a variable flame adjustment feature, the GF100 DV enables users to control the heat output according to their needs. The adjustable thermostat allows for consistent temperature regulation, making it a convenient option for any household. Additionally, the remote control capability adds an element of convenience, allowing homeowners to adjust settings from anywhere in the room.

Furthermore, the Jotul GF100 DV is designed with an impressive efficiency rating, providing peace of mind that you are minimizing fuel consumption while maximizing heat output. This not only benefits the environment but also translates to cost savings on energy bills over time.

The stove is available in multiple finishes, allowing users to choose a look that best fits their home’s interior. Whether opting for traditional black or a more contemporary enamel finish, the Jotul GF100 DV remains a prominent feature in any living space.

In summary, the Jotul GF100 DV is a sophisticated gas stove that blends traditional design with cutting-edge technology. Its combination of aesthetics, efficient heating, and user-friendly features make it a top choice for homeowners seeking both beauty and performance in their heating solutions.
Top Page Image Contents