Louisville Tin and Stove BBT103 warranty Direct Vent GAS Baseboard Heater, Canadian Patent #

Page 1

DIRECT VENT GAS

BASEBOARD HEATER

INSTALLATION AND

OPERATING INSTRUCTIONS

R

P/N 64900 /

 

MODEL NUMBERS

NAT. GAS

L.P. GAS

BBT53

BBT54

BBT103

BBT104

September 2004

R

 

INSTALLER MUST LEAVE THESE INSTRUCTIONS WITH THE CONSUMER, HAVE THEM COMPLETE, AND RETURN THE WARRANTY CARD.

WARNING: If the information in these instructions are not followed exactly, a fire or explosion may result causing property damage, personal injury or loss of life.

-Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this or any other appliance.

-WHAT TO DO IF YOU SMELL GAS:

•Do not try to light any appliance.

•Do not touch any electrical switch; do not use any phone in your building.

•Immediately call your gas supplier from a neighbor’s phone. Follow the gas supplier’s instructions.

•If you cannot reach your gas supplier, call the fire department.

- INSTALLATION AND SERVICE MUST BE PER- FORMED BY A QUALIFIED INSTALLER, SERVICE AGENCY OR THE GAS SUPPLIER.

This appliance must be connected to an

electrical ground.

WARNING:

CONNECT TO 115V ELECTRICAL POWER SUPPLY.

DO NOT CONNECT TO 220V POWER SUPPLY.

U.S. PATENT # 5253635

CANADIAN PATENT # 2066870

WARNING: Operation of this furnace without the properly installed, factory furnished vent system could result in Carbon Monoxide (CO) poisoning and possible death. For your safety, this furnace and the vent system should be inspected at least annually by a qualified service person.

May be installed in an aftermarket, permanently located, manufactured home (mobile home) where not prohibited by local codes. See owner’s manual for details. This appliance is not convertible for use with other gases, unless a certified kit is used.

This unit is not approved for installation in greenhouses, or environments involving dusty, wet, corrosive, or explosive conditions. Such conditions will invalidate the warranty and may create unsafe conditions.

NOTE: Obstruction in the vent exhaust tube or air intake tube due to insects, small animals, debris, etc. will prevent the heater from operating but DOES NOT constitute a warranty issue.

Page 1 Page 2
Image 1
Page 1 Page 2
Contents Canadian Patent # Direct Vent GAS Baseboard HeaterContents Safety Rules Clearances to Combustibles ClearancesLocation Clearances CONT’DThermostat Location Optional Kits InstallationStep Direct Vent GAS Baseboard ComponentsDo not cut to less than 7-1/2 Cont’d. next Completing Installation Operating Instructions For Your Safety Read Before OperatingTo Turn OFF GAS to Appliance Conversion Instructions GAS ConversionProper Burner Flame To Remove Main Burner for Inspection and CleaningBurner Orifice Wiring Diagram BBT53 & BBT54 WiringWiring Diagram BBT103 & BBT104 Step # Sequence of OperationStep Vent Riser KITSide Valve Concealer KIT SVCK5/10 Bottom Valve Concealer KIT BVCK5/10 Vent Weather Seal KIT VWSK5/10 Vent Weather Seal KIT Cont’d Symptom Possible Causes Corrective Action Trouble Shooting ChartMaintenance Instructions Trouble Shooting Control BoardService Record Date Model Numbers Direct Vent GAS Baseboard HeaterMarch Tampering is Dangerous Your GAS Control and Pilot Light SystemIf YOU Smell GAS, DON’T Light IT If YOU CAN’T Light IT DON’T Fight ITLouisville TIN and Stove Company Limited Warranty

BBT103, BBT104, BBT54, BBT53 specifications

Louisville Tin and Stove's BBT series, specifically the BBT54, BBT53, BBT103, and BBT104, represents a blend of traditional craftsmanship and modern heating technology. Each model is engineered to provide efficient heating solutions, making them ideal for both residential and commercial applications.

The BBT54 is a compact yet powerful unit, designed to fit seamlessly into smaller spaces while delivering robust heating capabilities. It features advanced insulation technology that maximizes heat retention, ensuring that the warmth permeates the room efficiently. With its user-friendly thermostat, homeowners can easily select their desired temperature settings, making it an excellent choice for energy-conscious consumers.

In contrast, the BBT53 emphasizes versatility and aesthetic appeal. It showcases a sleek design that complements various interior styles, from rustic to contemporary. This model includes a multi-fuel option, allowing users to choose between wood, coal, or gas, providing flexibility depending on the user's preferences and availability of resources. The BBT53 is also equipped with an automated ash removal system, reducing maintenance needs and making it user-friendly.

The BBT103 stands out with its larger heating capacity, suitable for bigger rooms or open floor plans. Its convection heating technology ensures even heat distribution, avoiding hot and cold spots in the room. This model also comes with smart technology features, including remote operation via smartphone apps, making it convenient for users to manage their heating systems from a distance.

Finally, the BBT104 is the flagship model in this series, boasting both power and sophistication. It integrates advanced environmental technologies, such as an eco-mode that optimizes fuel consumption, significantly reducing emissions. The BBT104 is also designed with a premium finish, adding an elegant touch to any space. Moreover, its enhanced safety features include automatic shut-off and carbon monoxide detection, ensuring peace of mind for families and businesses alike.

The Louisville Tin and Stove BBT series exemplifies the brand's commitment to quality and innovation in heating technology. Each model caters to different needs, whether it’s for energy efficiency, versatility, or enhanced safety, making the BBT54, BBT53, BBT103, and BBT104 outstanding choices for those seeking reliable and stylish heating solutions.
Top Page Image Contents