Safety Features, Cleaning, Storage | Honeywell HZ0360 guide

HZ-0360_OM v7.0.qxd:HZ-2200-3200-3220_OM_Rev1 4/15/10 12:08 PM Page 4

SAFETY FEATURES

The 360° Surround Heater™ is equipped with several devices and features for added protection:

•360° SafetyTIP™ is an all-around tip-over switch that disables the heater if it is accidentally tipped in any direction.

•A high temperature safety control prevents overheating.

•This heater is also equipped with a thermal cut-off fuse that will permanently shut down the heater should it operate at a higher than normal temperature.

•This heater was created using a high quality safety plastic.

CLEANING

We recommend that the 360° Surround Heater™ be cleaned at least once a month and before off-season storage.

•Turn the heater OFF (o) and unplug it. Allow it to cool.

•Use a dry cloth only to clean the external surfaces of the heater. DO NOT USE WATER, WAXES, POLISHES OR ANY CHEMICAL SOLUTION.

STORAGE

•Clean your 360° Surround Heater™ using the above-mentioned steps. Wrap the cord around the unit. Place in its original box and store it in a cool, dry place.

•This heater does not disassemble.

TROUBLESHOOTING

If your 360° Surround Heater™ shuts off unexpectedly or fails to operate, one of your heater safety features may have been activated to prevent overheating.

•Be sure it is plugged in and that the electrical outlet is working.

•Check your Thermostat Control setting. The unit may simply be off because you have reached your desired heat setting.

•Check for any obstructions. If you find an obstruction, turn the heater OFF (o) and unplug it. Allow the heater to cool completely, then remove the obstruction. Wait at least 10 minutes, then re-plug the heater in and follow the OPERATION instructions.

ELECTRICAL RATING

This product is rated 12.5 Amps (1500 watts) @ 120V, 60Hz.