Important Safety Information

THIS IS A HEATING APPLIANCE

DO NOT OPERATE THIS APPLIANCE WITHOUT FRONT PANEL INSTALLED.

•	An unvented room heater having an input rating of more	•	Installation and repair should be done by a QUALIFIED
	than 10,000 Btu per hour shall not be installed in a		SERVICE PERSON. The appliance should be inspected
	bedroom or bathroom.		before use and at least annually by a professional service
• Due to high temperatures, the appliance should be located			person. More frequent cleaning may be required due to
• Due to high temperatures, the appliance should be located			excessive lint from carpeting, bedding materials, etc. It is
	out of traffic and away from furniture and draperies.
	out of traffic and away from furniture and draperies.		imperative that control compartments, burners and
			imperative that control compartments, burners and
• Children and adults should be alerted to the hazard of			circulating air passageways of the appliance be kept clean.
	high surface temperature and should stay away to avoid	• Due to high surface temperatures, keep children, clothing
	burns or clothing ignition.	• Due to high surface temperatures, keep children, clothing
	burns or clothing ignition.		and furniture away.
			and furniture away.
•	Young children should be carefully supervised when	•	Keep appliance area clear and free from combustible
	they are in the same room with the appliance.	•	Keep appliance area clear and free from combustible
	they are in the same room with the appliance.		materials, gasoline and other flammable vapors and liquids.
			materials, gasoline and other flammable vapors and liquids.
• Do not place clothing or other flammable material on or		•	WARNING: ANY CHANGE TO THIS HEATER OR ITS
	near the appliance.	•	WARNING: ANY CHANGE TO THIS HEATER OR ITS
	near the appliance.		CONTROLS CAN BE DANGEROUS.
			CONTROLS CAN BE DANGEROUS.
• DO NOT use this room heater if any part has been under			Any safety screen or guard removed for servicing an appli-
	water. Immediately call a qualified service technician to		ance must be replaced prior to operating the heater.
	inspect the room heater and to replace any part of the
	control system and any gas control which has been under
	water.

WARNING

When used without adequate combustion and ventilation			CARBON MONOXIDE POISONING MAY LEAD TO
air, heater may give off CARBON MONOXIDE, an odor-
			DEATH.
less, poisonous gas.
		Early signs of carbon monoxide poisoning resemble the flu,

	Do not install heater until all necessary provisions are	with headache, dizziness and/or nausea. If you have these
	made for combustion and ventilation air. Consult the	signs, heater may not be working properly. Get fresh air at
	written instructions provided with the heater for infor-	once! Have heater serviced.
	mation concerning combustion and ventilation air. In	Some people — pregnant women, persons with heart or lung
	the absence of instructions, refer to the National Fuel
		disease, anemia, those under the influence of alcohol , those
	Gas Code, ANSI Z223.1, Section 5.3 or applicable local
		at high altitudes — are more affected by carbon monoxide
	codes.
		than others.

This heater is equipped with a PILOT LIGHT SAFETY		The pilot light safety system senses the depletion of oxygen
SYSTEM designed to turn off the heater if not enough fresh
		at its location. If this heater is installed in a structure having
air is available.
		a high vertical dimension, the possibility exists that the

	DO NOT TAMPER WITH PILOT LIGHT SAFETY	oxygen supply at the higher levels will be less than that at the
	SYSTEM!	heater. In this type of application, a fan to circulate the
		structure air will minimize this effect. The use of this fan will
If heater shuts off, do not relight until you provide fresh air.
		also improve the comfort level in the structure. When a fan

If heater keeps shutting off, have it serviced. Keep burner		is used to circulate air, it should be located so that the air flow
and control compartment clean.		is not directed at the burner.

R-2688

Page 3

EE-25-2 specifications

The Empire Products EE-25-2 is a versatile and robust piece of equipment designed for a variety of applications in industrial and commercial settings. Notable for its efficiency and performance, this model stands out in the marketplace due to its array of features and cutting-edge technologies that cater to the needs of modern industries.

One of the primary characteristics of the EE-25-2 is its powerful operational capacity. With a significant output capability, it is engineered to handle demanding workloads while maintaining high standards of performance. This makes it suitable for diverse operations, from manufacturing processes to large-scale assembly tasks.

The EE-25-2 is equipped with advanced control systems that enhance user experience and operational efficiency. Its intuitive interface allows for easy programming and monitoring, enabling operators to adjust settings and access critical data in real-time. This feature significantly reduces downtime and improves overall productivity, ensuring that businesses can meet their targets with ease.

Another key feature of the Empire Products EE-25-2 is its energy-efficient design. The equipment incorporates state-of-the-art technologies that minimize energy consumption without compromising on performance. This not only leads to cost savings for users but also aligns with environmentally friendly practices, making it an attractive option for businesses looking to reduce their carbon footprint.

The durability and reliability of the EE-25-2 are evident in its robust construction. Built with high-quality materials, it is designed to withstand the rigors of daily operations in challenging environments. Its resilience ensures that maintenance costs are kept to a minimum, and the longevity of the equipment is maximized.

Additionally, the EE-25-2 features an array of safety mechanisms that protect both the operator and the equipment. These include emergency stop functions, overload protection, and safety guards, which comply with industry standards and promote a secure working environment.

One of the standout characteristics of the EE-25-2 is its versatility. It can be customized with various attachments and tools, making it adaptable to different tasks and applications. This flexibility means that it can seamlessly integrate into existing workflows, providing businesses with the ability to pivot and adjust to changing demands.

In conclusion, the Empire Products EE-25-2 is a powerful and efficient piece of equipment with a host of features designed for modern industrial applications. With its advanced technologies, energy efficiency, durability, and safety mechanisms, it is a reliable choice for businesses looking to enhance productivity while maintaining a commitment to safety and sustainability.