FMI FVFM27PR installation manual Installing Logs, Installing Bottom Log #1

Page 13

OWNER’S MANUAL

INSTALLATION

Bottom Log (#1)

Continued

INSTALLING LOGS

WARNING: Failure to posi- tion the parts in accordance with these diagrams or failure to use only parts specifically approved with this heater may result in prop- erty damage or personal injury.

CAUTION: After installation and periodically thereafter, check to ensure that no flame comes in contact with any log. With the heater set to High, check to see if flames contact any log. If so, re-

Burner

Port

Grate

Chassis Burner

Figure 17 - Installing Bottom Log (#1)

Top Log (#2)

Peg

Figure 19 - Installing Top Log (#2)

position logs according to the log installation instructions in this manual. Flames contacting logs will create soot.

It is very important to install the logs exactly as instructed. Do not modify logs. Only use logs supplied with heater.

1.Place bottom log (#1) on grate to fit as illustrated in Figure 17. Make sure open areas of log set line up with burner ports (see Figure 18). Log will fit securely on chassis. IMPORTANT: Make sure log does not cover any burner ports.

2.Facing front of unit, place top log (#2) onto the pegs in the center of the bot- tom log (see Figure 19).

3.Position log piece (#3) by aligning holes on underside with remaining pegs on bottom log (see Figure 20).

4.Place lava rock on fireplace floor around base of heater.

Burner

Log Piece (#3)

Logs

Ports

 

 

Peg

Figure 18 - Installing Log set (Top View)

Figure 20 - Installing Log Piece (#3)

105224

13

Page 12 Page 14
Image 13
Page 12 Page 14
Contents What to do if YOU Smell GAS Unvented VENT-FREE PROPANE/LP GAS LOG HeaterSafety Information Remote Control Accessories Local Codes Unpacking Product FeaturesProduct Identification Providing Adequate Ventilation AIR for Combustion and VentilationUnusually Tight Construction Confined and Unconfined SpaceDetermining FRESH-AIR Flow for Heater Location AIR for Combustion VentilationDetermining if You Have a Confined or Unconfined Space ExampleVentilation Air From Inside Ventilation AIRBuilding Ventilation Air From OutdoorsCheck GAS Type InstallationMinimum Fireplace Clearance to Combustible Materials Minimum Wall and Ceiling Clearances see FigureIf Not Using Mantel If Using MantelSee Accessories, Minimum Noncombustible Material ClearancesMantel Clearances Determining Minimum Mantel Clear- ance When using a HoodFloor Clearances Determining Minimum Mantel ClearanceInstalling Heater Base Assembly Installing Damper Clamp Accessory for Vented OperationInstallation Items Needed Known as wellhead gas Connecting to GAS SupplyPressure Testing Heater Gas Connections Pressure Testing Gas Supply Piping SystemChecking GAS Connections Test Pressures In Excess Of 1/2 PsigInstalling Bottom Log #1 Installing LogsOperating Heater For Your Safety Read Before LightingLighting Instructions To Turn OFF GAS to Appliance Manual Lighting ProcedureOptional Remote Operation Pilot Flame Pattern Inspecting BurnersBurner Primary AIR Holes Main BurnerObserved Problem Possible Cause TroubleshootingObserved Problem Possible Cause Remedy Observed Problem Possible Cause Remedy Specifications Cleaning and MaintenanceService Hints Technical ServiceReplacement Parts AccessoriesWiring Diagram FVFM27PR Illustrated Parts BreakdownDescription QTY Parts ListWarranty Information

FVFM27PR specifications

The FMI FVFM27PR is a cutting-edge kitchen range that combines both style and functionality, making it a perfect addition for modern culinary spaces. Designed with an emphasis on efficiency, this range is equipped to handle various cooking tasks while delivering exceptional performance.

One of the standout features of the FMI FVFM27PR is its powerful gas burners. With multiple burner configurations, users can experience precise control over flame intensity, allowing for perfect searing, simmering, and boiling. This flexibility makes it an ideal choice for professional chefs and home cooks alike, facilitating a wide array of cooking techniques.

The FVFM27PR also boasts an expansive oven capacity, designed to accommodate large meal preparations. The spacious interior allows for cooking multiple dishes at once, making it perfect for entertaining or family gatherings. Moreover, the oven is equipped with advanced convection technology, ensuring even heat distribution and faster cooking times. This technology not only optimizes baking results but also enhances food texture and flavor profiles.

In terms of design, the FMI FVFM27PR features a sleek stainless-steel exterior that brings a modern aesthetic to any kitchen. Its user-friendly control panel is intuitively designed for easy access, featuring clearly labeled knobs and digital displays that provide precise settings for cooking temperatures and times, simplifying meal preparation.

Safety is an essential aspect of the FMI FVFM27PR, with features such as an automatic shut-off function and flame failure safety device. These technologies work together to enhance user safety by ensuring that gas flow is interrupted if the flame goes out, mitigating the risk of accidents in the kitchen.

Additionally, the FMI FVFM27PR integrates smart technology, allowing users to connect to their home Wi-Fi. This feature enables remote monitoring and operation through a smartphone app, providing greater convenience and control over cooking processes even when away from the kitchen.

In conclusion, the FMI FVFM27PR is a versatile, high-performance kitchen range that combines innovative technologies with stylish design. Its powerful burners, spacious oven, and smart capabilities make it an ideal choice for anyone passionate about cooking, whether a novice or a seasoned professional. Investing in the FVFM27PR not only enhances cooking efficiency but also elevates the overall kitchen experience.
Top Page Image Contents