FMI FVFM27PR installation manual Product Identification, Local Codes Unpacking Product Features

Page 3

OWNER’S MANUAL

PRODUCT

IDENTIFICATION

Log Set

Optional

 

Remote

Piezo

Control

Ignitor

Optional Remote

Flame

 

Adjustment

Base Assembly

Selector Switch

Knob

 

 

 

Control Knob

Figure 1 - Product Identification

LOCAL CODES

UNPACKING

PRODUCT

FEATURES

OPERATION

This heater is clean burning. It requires no outside venting. There is no heat loss out a vent or up a chimney. Heat is generated by realistic, dancing yellow flames. This heater is de- signedforvent-freeoperationwithfluedamper closed. It has been tested and approved to ANS Z21.11.2 standards for unvented heat- ers. State and local codes in some areas pro- hibit the use of vent-free heaters. This heater may also be operated as a vented decorative (ANS Z21.60) product by opening the flue damper (non-thermostat operation only).

APPLICATION

These multisided logs are designed to be equallybeautifulwhenviewedfromanyangle.

They are designed specifically for use in see-through, peninsula, and island fireboxes with multiple openings. You may also in- stall this log heater in a standard firebox.

SAFETY PILOT

This heater has a pilot with an Oxygen Depletion Sensor Shutoff System (ODS). The ODS/pilot is a required feature for vent- free room heaters. The ODS/pilot shuts off

Install and use heater with care. Follow all local codes. In the absence of local codes, use the latest edition of The National Fuel Gas Code ANS Z223.1, also known as NFPA 54*.

*Available from:

American National Standards Institute, Inc.

1430 Broadway

New York, NY 10018

National Fire Protection Association, Inc.

Batterymarch Park

Quincy, MA 02269

Note: Where listed vented decorative logs are required, thermostat operation is not permitted.

CAUTION: Do not remove the metal data plates from the grate assembly. The data plates contain important product information.

1.Remove logs and heater base assem- bly from carton. Note: Do not pick up heater base assembly by the burner. This could damage heater. Always handle base assembly by grate.

2.Remove all protective packaging ap- plied to logs and heater for shipment.

3.Check all items for any shipping dam- age. If damaged, promptly inform dealer where you bought heater.

the heater if there is not enough fresh air.

PIEZO IGNITION SYSTEM

This heater has a piezo ignitor. This system requires no matches, batteries, or other sources to light heater.

REMOTE CONTROL ACCESSORIES

There are four optional remote controls that can be purchased separately for this log heater

Wall switch

Wall thermostat

Hand-held ON/OFF remote

Hand-held thermostat remote

See Accessories, page 21.

The wall thermostat or hand-held thermo- stat may not be used where vented decora- tive listing is required.

105224

3

Image 3
Contents What to do if YOU Smell GAS Unvented VENT-FREE PROPANE/LP GAS LOG HeaterSafety Information Local Codes Unpacking Product Features Remote Control AccessoriesProduct Identification Confined and Unconfined Space AIR for Combustion and VentilationProviding Adequate Ventilation Unusually Tight ConstructionExample AIR for Combustion VentilationDetermining FRESH-AIR Flow for Heater Location Determining if You Have a Confined or Unconfined SpaceVentilation Air From Outdoors Ventilation AIRVentilation Air From Inside BuildingMinimum Wall and Ceiling Clearances see Figure InstallationCheck GAS Type Minimum Fireplace Clearance to Combustible MaterialsMinimum Noncombustible Material Clearances If Using MantelIf Not Using Mantel See Accessories,Determining Minimum Mantel Clearance Determining Minimum Mantel Clear- ance When using a HoodMantel Clearances Floor ClearancesInstalling Damper Clamp Accessory for Vented Operation Installing Heater Base AssemblyInstallation Items Needed Known as wellhead gas Connecting to GAS SupplyTest Pressures In Excess Of 1/2 Psig Pressure Testing Gas Supply Piping SystemPressure Testing Heater Gas Connections Checking GAS ConnectionsInstalling Bottom Log #1 Installing LogsFor Your Safety Read Before Lighting Operating HeaterLighting Instructions Manual Lighting Procedure To Turn OFF GAS to ApplianceOptional Remote Operation Main Burner Inspecting BurnersPilot Flame Pattern Burner Primary AIR HolesObserved Problem Possible Cause TroubleshootingObserved Problem Possible Cause Remedy Observed Problem Possible Cause Remedy Technical Service Cleaning and MaintenanceSpecifications Service HintsAccessories Replacement PartsWiring Diagram FVFM27PR Illustrated Parts BreakdownDescription QTY Parts ListWarranty Information

FVFM27PR specifications

The FMI FVFM27PR is a cutting-edge kitchen range that combines both style and functionality, making it a perfect addition for modern culinary spaces. Designed with an emphasis on efficiency, this range is equipped to handle various cooking tasks while delivering exceptional performance.

One of the standout features of the FMI FVFM27PR is its powerful gas burners. With multiple burner configurations, users can experience precise control over flame intensity, allowing for perfect searing, simmering, and boiling. This flexibility makes it an ideal choice for professional chefs and home cooks alike, facilitating a wide array of cooking techniques.

The FVFM27PR also boasts an expansive oven capacity, designed to accommodate large meal preparations. The spacious interior allows for cooking multiple dishes at once, making it perfect for entertaining or family gatherings. Moreover, the oven is equipped with advanced convection technology, ensuring even heat distribution and faster cooking times. This technology not only optimizes baking results but also enhances food texture and flavor profiles.

In terms of design, the FMI FVFM27PR features a sleek stainless-steel exterior that brings a modern aesthetic to any kitchen. Its user-friendly control panel is intuitively designed for easy access, featuring clearly labeled knobs and digital displays that provide precise settings for cooking temperatures and times, simplifying meal preparation.

Safety is an essential aspect of the FMI FVFM27PR, with features such as an automatic shut-off function and flame failure safety device. These technologies work together to enhance user safety by ensuring that gas flow is interrupted if the flame goes out, mitigating the risk of accidents in the kitchen.

Additionally, the FMI FVFM27PR integrates smart technology, allowing users to connect to their home Wi-Fi. This feature enables remote monitoring and operation through a smartphone app, providing greater convenience and control over cooking processes even when away from the kitchen.

In conclusion, the FMI FVFM27PR is a versatile, high-performance kitchen range that combines innovative technologies with stylish design. Its powerful burners, spacious oven, and smart capabilities make it an ideal choice for anyone passionate about cooking, whether a novice or a seasoned professional. Investing in the FVFM27PR not only enhances cooking efficiency but also elevates the overall kitchen experience.