Hubbell Electric Heater Company B manual Water Heater Placement, Piping Installation

Page 9

SECTION II – INSTALLATION

WARNING / CAUTION

DO NOT TURN ON THE ELECTRIC POWER SUPPLY to this equipment until heater is completely filled with water and all air has been released. If the heater is NOT filled with water when the power is turned on, the heating elements will burn out.

For protection against excessive pressures and temperatures, local codes require the installation of a temperature-and-pressure (T&P) relief valve certified by a nationally recognized laboratory that maintains periodic inspection of production of listed equipment of materials, as meeting the requirements for Relief Valves and Automatic Gas Shutoff for Hot Water Supply Systems. ANSI Z21.22-1971. THE CUSTOMER IS RESPONSIBLE TO PROTECT PROPERTY AND PERSONNEL FROM HARM WHEN THE VALVE FUNCTIONS.

All water heaters have a risk of leakage at some unpredictable time. IT IS THE CUSTOMER'S RESPONSIBILITY TO PROVIDE A CATCH PAN OR OTHER ADEQUATE MEANS, SO THAT THE RESULTANT FLOW OF WATER WILL NOT DAMAGE FURNISHINGS OR PROPERTY.

WATER HEATER PLACEMENT

1.Place the heater on a solid foundation in a clean, dry location as near as possible to the dish washing machine.

2.The water heater should be protected from freezing and waterlines insulated to reduce energy and water waste.

3.Leave a minimum of 18” clearance for element withdrawal, if necessary.

4.Do not install in an area where flammable liquids or combustible vapors are present.

PIPING INSTALLATION

NOTE: The most effective means for preventing deterioration from accelerated corrosion due to galvanic and stray current is the installation of dielectric fittings/unions. The installation of these fittings is the responsibility of the installing contractor.

1.Connect the cold water inlet and hot water outlet to the appropriate connections as shown; refer to the drawing for location and sizes.

2.Install water pressure regulator, if supplied, and adjust to the pressure recommended by the dishwasher manufacturer. WHEN A STANDARD PRESSURE REGULATOR IS USED, (other than that purchased with the booster), it acts as a check valve and it is possible that thermal expansion will cause the relief valve to drip or occasionally blow off a small amount

9

Page 8 Page 10
Image 9
Page 8 Page 10
Contents Operating and Maintenance Manual for Electric Booster Heater STRATFORD, CT Hubbell Electric Heater CompanyTable of Contents Section Title Page Tank Section I General Description and ConstructionTank Connections Heating ElementControl Thermostat Temperature High Limit SwitchMagnetic Contactor Outer Shell , INSULATION, and SupportsLow Water Cut-Off OptionsStainless Steel Outer Jacket Piping Installation Water Heater PlacementFilling the Heater Electrical InstallationFinal Checks Page Page Page Maintenance and Operation Section III Scheduled Maintenance and OperationFreezing Quarterly InspectionAnnual Inspection Symptom Probable Cause Corrective Action / Remedy Section IV TroubleshootingPage Surface Temperature High Limit CUT-OFF Section V Servicing & Replacement of PartsHeating Element Immersion Thermostat Magnetic Contactor Relief Valve Formulas Section VI Miscellaneous Charts and Formulas Element ChartTorque Values

B specifications

Hubbell Electric Heater Company B stands as a prominent name in the electric heating industry, renowned for its commitment to quality, innovation, and energy efficiency. Established with the mission to provide reliable heating solutions, the company has developed a wide range of electric heaters designed to meet diverse commercial and industrial heating needs.

One of the primary features of Hubbell Electric Heater Company B's products is their robust construction, ensuring durability even in the harshest environments. The heaters are built using high-quality materials that resist corrosion and wear, making them suitable for locations like warehouses, factories, and outdoor installations. The design focus on longevity, along with a user-friendly interface, allows for easy operation and maintenance.

Hubbell's electric heaters are equipped with advanced technologies to enhance performance and energy efficiency. Many models incorporate thermostatic controls, allowing users to maintain desired temperatures while minimizing energy consumption. This feature not only reduces operational costs but also contributes to a more sustainable approach to heating. The heaters also use innovative heating elements that provide rapid and uniform heat distribution, ensuring consistent warmth across a designated area.

In addition to their heating capabilities, Hubbell heaters are designed with safety features that exceed industry standards. Many models come with built-in overheat protection, automatic shut-off mechanisms, and thermal insulation to prevent burns or injuries, providing peace of mind to users in high-traffic or hazardous environments.

The versatility of Hubbell Electric Heater Company B's product range is another characteristic that sets it apart. From unit heaters and infrared heaters to process heaters and custom solutions, the company caters to various applications across multiple industries. Whether the requirement is for temporary heating during construction projects or permanent heating solutions for manufacturing facilities, Hubbell addresses these needs effectively.

Moreover, Hubbell Electric Heater Company B is committed to continuous improvement and innovation. The company invests in research and development to stay ahead of market trends and incorporate cutting-edge technologies, ensuring that their products remain highly competitive and relevant.

In conclusion, Hubbell Electric Heater Company B offers a comprehensive selection of high-quality electric heaters characterized by durability, energy efficiency, and advanced safety features. Their commitment to innovation and customer-centric solutions makes them a trusted partner in the electric heating industry, providing effective heating solutions for a variety of applications.
Top Page Image Contents