Hubbell Electric Heater Company EMV manual Phase Heating Element

Page 16

3-PHASE HEATING ELEMENT

1.Disconnect power from unit.

2.Shut off incoming water supply.

3.Attach hose to drain connection.

4.Lift manual release lever on relief valve to let air into system or break union on outgoing water line.

5.Drain water from tank.

6.Disconnect the wires from the heating element terminals.

7.Remove the 3/8-16 nuts.

Tank Flange

Element Terminals

Nuts

8. Withdraw element assembly and remove gasket.

Gasket

Element Assembly

9.Install new gasket and insert new heating element.

10.Rewire element according to the drawing and in accordance with the jumper configuration as shown below for your heater.

11.Fill tank and check around gasket for any leaks.

16

Image 16
Contents Electric Heater Company Hubbell Electric Heater Company STRATFORD, CTTable of Contents Section Title Page Section I General Description and Construction ConstructionTemperature High Limit Switch Mixing ValveAutomatic AIR Vent Valve Dual Temperrature and Pressure GaugeWater Heater Placement OptionsPiping Installation Section III Scheduled Maintenance and Operation Quarterly Inspection Annual InspectionDate START-UP Spike Output Temperature Comments Tested by Section IV Troubleshooting Symptom Probable Cause Corrective Action / RemedySection V Servicing & Replacement of Parts Surface Temperature High Limit CUT-OFFImmersion Temperature High Limit CUT-OFF Single Phase Heating Element Phase Heating Element Phase Element Jumper Configuration Immersion Thermostat Magnetic Contactor 3-PHASE only Relief Valve RE-CALIBRATE Mixing Valve Single Phase Element Chart Section VI Element ChartsPhase Element Chart

EMV specifications

Hubbell Electric Heater Company has long been renowned for its innovation and expertise in the electric heating industry. One of its standout products is the EMV series, specifically designed for commercial and industrial applications where efficiency and reliability are paramount. The EMV series combines modern technologies with robust design to deliver consistent performance in a variety of environments.

One of the primary features of the EMV heater is its high-efficiency heating element. Utilizing advanced materials and construction techniques, these heaters provide rapid heat-up times while maintaining energy efficiency. This is crucial in commercial settings where downtime can lead to significant operational costs. The built-in thermostatic controls allow for precise temperature regulation, ensuring that energy is not wasted on overheating, thus enhancing overall efficiency.

Another characteristic that sets the EMV series apart is its durable construction. Designed to withstand demanding conditions, the heaters are built from high-quality materials that resist corrosion, moisture, and mechanical impact. This durability is particularly beneficial for industrial applications, where equipment is often exposed to harsh environments. The EMV series also features a compact design, making it suitable for installation in tight spaces, a common requirement in modern industrial facilities.

The EMV heaters come equipped with advanced safety features, including over-temperature protection and a thermal cut-off switch. These safety mechanisms are essential for ensuring reliable operation and protecting both the heater and the surrounding environment from potential hazards. Additionally, the heaters are easy to maintain, with accessible components designed for quick inspections and servicing, reducing downtime and maintenance costs.

From a technology standpoint, the EMV series integrates smart controls that allow for remote monitoring and adjustment. This connectivity enables facility managers to operate the heaters more intelligently, optimizing energy use and reporting on operational efficiencies. The integration of digital technology with traditional heating solutions reflects the company's commitment to innovation and adaptability in a fast-evolving market.

In summary, the Hubbell Electric Heater Company EMV series epitomizes the blend of efficiency, durability, and advanced technology in electric heating solutions. Its features cater specifically to the needs of commercial and industrial users, making it a preferred choice for those seeking reliable heating solutions in demanding environments. The combination of high efficiency, safety features, and smart technology positions the EMV series as a leading electric heater in the market today.