Hubbell Electric Heater Company EMV manual Piping Installation

Page 8

PIPING INSTALLATION

NOTE: The most effective means for preventing deterioration from accelerated corrosion due to galvanic and stray current is the installation of dielectric fittings/unions. The installation of these fittings is the responsibility of the installing contractor.

1.Connect the cold water inlet and tepid water outlet to the appropriate connections as shown below; refer to the drawing for location and sizes.

2.Install the combination temperature and pressure safety relief valve in the tapping provided. Note that this is required by law for safety considerations.

Install into provided tapping

Manual Release Lever

Temperature Probe

Outlet to floor drain

Temperature and Pressure Relief Valve

3.Install a relief valve overflow pipe to a nearby floor drain. CAUTION: No valve of any type should be installed between the relief valve and tank or in the drain line.

4.On startup, thermal expansion will cause the water to expand. Hubbell recommends that a thermal expansion tank or supplementary pressure relief device be installed in the hot water outlet to allow for this expansion.

8

Image 8
Contents Electric Heater Company Hubbell Electric Heater Company STRATFORD, CTTable of Contents Section Title Page Section I General Description and Construction ConstructionTemperature High Limit Switch Mixing ValveAutomatic AIR Vent Valve Dual Temperrature and Pressure GaugeWater Heater Placement OptionsPiping Installation Section III Scheduled Maintenance and Operation Quarterly Inspection Annual InspectionDate START-UP Spike Output Temperature Comments Tested by Section IV Troubleshooting Symptom Probable Cause Corrective Action / RemedySection V Servicing & Replacement of Parts Surface Temperature High Limit CUT-OFFImmersion Temperature High Limit CUT-OFF Single Phase Heating Element Phase Heating Element Phase Element Jumper Configuration Immersion Thermostat Magnetic Contactor 3-PHASE only Relief Valve RE-CALIBRATE Mixing Valve Phase Element Chart Section VI Element ChartsSingle Phase Element Chart

EMV specifications

Hubbell Electric Heater Company has long been renowned for its innovation and expertise in the electric heating industry. One of its standout products is the EMV series, specifically designed for commercial and industrial applications where efficiency and reliability are paramount. The EMV series combines modern technologies with robust design to deliver consistent performance in a variety of environments.

One of the primary features of the EMV heater is its high-efficiency heating element. Utilizing advanced materials and construction techniques, these heaters provide rapid heat-up times while maintaining energy efficiency. This is crucial in commercial settings where downtime can lead to significant operational costs. The built-in thermostatic controls allow for precise temperature regulation, ensuring that energy is not wasted on overheating, thus enhancing overall efficiency.

Another characteristic that sets the EMV series apart is its durable construction. Designed to withstand demanding conditions, the heaters are built from high-quality materials that resist corrosion, moisture, and mechanical impact. This durability is particularly beneficial for industrial applications, where equipment is often exposed to harsh environments. The EMV series also features a compact design, making it suitable for installation in tight spaces, a common requirement in modern industrial facilities.

The EMV heaters come equipped with advanced safety features, including over-temperature protection and a thermal cut-off switch. These safety mechanisms are essential for ensuring reliable operation and protecting both the heater and the surrounding environment from potential hazards. Additionally, the heaters are easy to maintain, with accessible components designed for quick inspections and servicing, reducing downtime and maintenance costs.

From a technology standpoint, the EMV series integrates smart controls that allow for remote monitoring and adjustment. This connectivity enables facility managers to operate the heaters more intelligently, optimizing energy use and reporting on operational efficiencies. The integration of digital technology with traditional heating solutions reflects the company's commitment to innovation and adaptability in a fast-evolving market.

In summary, the Hubbell Electric Heater Company EMV series epitomizes the blend of efficiency, durability, and advanced technology in electric heating solutions. Its features cater specifically to the needs of commercial and industrial users, making it a preferred choice for those seeking reliable heating solutions in demanding environments. The combination of high efficiency, safety features, and smart technology positions the EMV series as a leading electric heater in the market today.