General Recommendations

Important

Before using the heater, read and understand all instructions and follow them carefully. The manufacturer is not responsible for damages to goods or persons due to improper use of units.

The heater is designed and approved for use as a construction heater in accordance with Standard ANSI Z83.7 - CGA 2.14.

Intended use is the temporary heating of buildings or structures under construction, alteration or repair.

Warning

CHECK WITH YOUR LOCAL FIRE SAFETY AUTHORITY IF YOU HAVE QUESTIONS ABOUT APPLICATIONS.

Here are a few general guidelines which should be followed:

•Follow the instructions in this booklet very carefully.

•Don’t install the heater in places where there may be a risk of fire or explosion.

•Inflammable material should be kept at a safe distance from the heater (Minimum 6 feet).

•All fire prevention regulations must be adhered to.

•The room or building which is being heated must be sufficiently ventilated so that the heater has enough air to function properly.

•The heater must be near a chimney or chimney flue and a suitable electric switchboard.

•Don’t let animals or children near the heater.

•Make sure heater is inspected before each use, and at least annually by a qualified service person.

•After use make sure the disconnecting switch is off. When using any type of space heater it is obligatory: not to exceed the maximum level of heat output of the furnace

(“TECHNICAL SPECIFICATIONS TABLE”).

•To make sure that there is adequate air circulation and air supply to the heater and that nothing is obstructing the aspiration and expulsion of air; movement of air may be obstructed in various ways including placing covers or other objects on the heater or positioning the heater too near a wall or other large object. If the airflow is not adequate, the combustion chamber will overheat and the overheat safety thermostat L1 will turn the burner off and on continuously (“troubleshooting”).

TECHNICAL SPECIFICATIONS			4000ID	4000ID	7000id	hd7000id

Heat input		[kBTU/h]	400	400	700	700

Air flow		[cfm]	4.240	4.240	7.420	7.420

Heat output		[kBTU/h]	340	340	595	595

Oil N”2 Max fuel		[LBH]	20.4	20.4	35.8	35.8
consumption		[LBH]	20.4	20.4	35.8	35.8
consumption

Natural gas fuel		[CFH]	391.4	391.4	684.9	684.9
consumption		[CFH]	391.4	391.4	684.9	684.9
consumption

Propane fuel consumption		[CFH]	157.0	157.0	274.7	274.7

	Phase		1	1	1	1

Power supply	Voltage	[V]	120	220	220	220

	Frequency	[Hz]	60	60	60	60

Electric consumption		[W]	1.240	1.760	2.120	2.300

		[A]	13.5	14.5/5.8	7.0	14.8
		[A]	13.5	14.5/5.8	7.0	14.8

Diesel burner model			Riello 40 F10		Riello 40 F15

Nozzle		[USgalll1]	2.25 GPH 600 B	2.25 GPH 60’ B	3.50 GPH 60’ B	3.50 GPH 60’ B

Gas burner model			Riello 40 G400		Riello 40 G750
(nalural gas or propane)			Riello 40 G400		Riello 40 G750
(nalural gas or propane)

Gas supply pressure:			min 4” w.c. max 10” w.c.		min 7” w.c. max 14” w.c.
natural gas			min 4” w.c. max 10” w.c.		min 7” w.c. max 14” w.c.
natural gas

Gas supply pressure:			min 8” w.c. max 13” w.c.		min 8” w.c max 14” w.c.
propane			min 8” w.c. max 13” w.c.		min 8” w.c max 14” w.c.
propane

Static pressure		[lnWC]	0.4	0.8	0.4	0.8

Flue diameter		[In]	5.9	5.9	7.9	7.9

Compulsory flue draft		[lnWC]	0.05	0.05	0.05	0.05

Maximum air temperature		°F	250.0	250.0	250.0	250.0

Dimensions. L x W x H		[In]	72x31x43	82x31x43	85x35x53	101x35x53

Weight		[Ib]	353	364	550	562
Weight		[Ib]	353	364	550	832 (HD Version)
						832 (HD Version)

ENERCO GROUP, INC. Indirect Fired Portable Heater

Operating Instructions and Owner’s Manual

7000ID specifications

The Enerco 7000ID is a cutting-edge infrared heater that represents a significant advancement in portable heating technology. This versatile and efficient heating solution is designed for both residential and commercial applications, providing users with comfort and convenience during colder months.

One of the standout features of the Enerco 7000ID is its innovative infrared technology. Unlike traditional heaters that warm the air, infrared heaters generate radiant heat that warms objects and people directly within their vicinity. This results in feeling warm almost instantaneously, allowing for quick and efficient heating. The infrared heat produced is similar to the heat from the sun, making it a natural and comfortable option for indoor and outdoor spaces.

Another notable characteristic of the Enerco 7000ID is its impressive heating capacity. Designed to heat spaces up to 1,500 square feet, this model is suitable for large rooms, garages, patios, and workshops. Its powerful 7,000 BTU output ensures that even during the coldest days, users can maintain a warm and inviting environment.

The Enerco 7000ID also places a strong emphasis on safety and durability. It is equipped with advanced safety features such as an automatic shut-off system that activates in the case of overheating or tipping. Additionally, the outer casing is designed with high-quality materials that withstand the rigors of frequent use, making it both reliable and long-lasting.

Portability is another key aspect of the Enerco 7000ID. The unit is designed with built-in handle grips, making it easy to move from one location to another. Its compact design means it can be easily stored when not in use, freeing up valuable space in homes or businesses.

Moreover, the Enerco 7000ID operates quietly, contributing to a more pleasant environment without the disruptive noise associated with conventional heaters. Its user-friendly thermostat controls allow for easy temperature adjustments, ensuring users can customize their heating experience to their personal comfort levels.

In summary, the Enerco 7000ID is a powerful, efficient, and versatile infrared heater that excels in both performance and safety. Its advanced heating technology, impressive capacity, portable design, and focus on user comfort make it an ideal choice for anyone seeking an effective heating solution for their space. Whether used indoors or outdoors, the Enerco 7000ID promises to deliver warmth and comfort when it is needed most.