Samsung SSC17WEB manual Display Menu function setting, Eng-27

If the time is set for each camera channel by pressing KEY, each camera picture will be displayed for the set time and switched to the next picture automatically.

3-3) DISPLAY MENU function setting

Function: Allows users to select the color and ON/OFF of borderline at QUAD DISPLAY.

Setting method: Move to #3. DISPLAY SETTING MENU by pressing KEY at SETUP MENU, then press the KEY to display the OSD as shown in the figure below. (The figure shows the initial setting status.)

06/01/03	13:14:00
DISPLAY SETTING
BORDER	ON
BORDER COLOR	GRAY
PIP POSITION	B-RIGHT
NETWORK STATUS	ON/OFF

Move to each item by pressing KEY, and change the set value.

1)BORDER item determines whether or not boarder line is displayed at QUAD DISPLAY MODE. (ON: Displays the boarder line, OFF: Does not display the boarder line)

2)BORDER COLOR item sets boarder line color among three colors: Black, White, Gray.

3)PIP POSITION item sets the location of sub picture at PIP DISPLAY. (T-LEFT: Upper part of left

side, T-RIGHT: Upper part of right side, B-LEFT: Lower part of left side, B-RIGHT: Lower part of right side)

4)NETWORK STATUS determines the display of [S], [D], [P] displayed at the left of top on the screen according to status of NETWORK.

Refer to 3-6) NETWORK SETTING function and setting method for the respective detailed status.

(ON: Displays the NETWORK STATUS, OFF: Does not display the NETWORK STATUS)

Eng-27