4-5) ZOOM MODE DISPLAY
When users want to see zoomed image of a specific area of the display, press the ZOOM KEY in the front to display zoom selection area. Select zoom target area by turning
KEY left and right, and press the 
KEY, then, the selected area
will be displayed at full single mode with zoomed area doubled. At zoom function operation at SINGLE DISPLAY MODE (CH2), the operation will be carried out as shown in figure below. (Zoom selection areas at SINGLE DISPLAY MODE are nine.)
06/01/0313:14:0006/01/0313:14:00
| ➯ |
|
|
|
| ||
| Press ZOOM | ||
CH2 | KEY | ||
| CH2 | ||
CH2 SINGLE DISPLAY | ZOOM area is activated. | ||
|
| ➯ | |
06/01/03 | 13:14:00 | 06/01/03 |
13:14:00
| ➯ |
| |
| Press |
| |
| KEY | CH2 | |
|
| ||
The selected area will be doubled | Press | KEY and | |
and at FULL DISPLAY. | |||
move to desired location | |||