Samsung SSA-S1000 user manual Initializing the System by SHORT-CIRCUITING, Basic Operations

system initialization & basic operations

INITIALIZING THE SYSTEM BY SHORT-CIRCUITING

1.	Turn off the product and short-circuit three lines: white line of
	the door lock device, green line of the Exit button, and yellow
	line of the lock type.
2.	When you turn the product back on, all of the LED indicators
	turn red or green, repeat turning on/off twice before being
	completely turned off.

Short-Circuit

White

Door Lock

Green

Exit Button

3. In the power-off condition, all LED indicators turn green

bottom up in sequence.

Lock Type

Yellow

4.When you hear a beep 4 times, that indicates that the

initialization is completed. Black

Power Red

M If you initialize the system, all of the data settings will return to the factory default.

BASIC OPERATIONS

When the power is supplied

1.All of the LED indicators will turn red or green, and repeat turning ON/OFF twice before being completely turned OFF. In the power-off condition, all LED indicators turn red bottom up in sequence.

2.You will hear a beep once.

When you present a registered card to the product or press the Exit button

1.All LED indicators turn from red to green, and turn off top down in sequence before turning back red.

2.Then, the door stays open for the specified time with the upper two indicators turning green, which indicates the door is open.

3.You will hear a beep once.

When you present an unregistered card to the product

1.All LED indicators turn red, and repeat turning on/off twice before staying in ON.

2.You will hear a beep twice.

When you present a user card to the product while the door is open

1.The two LED indicators from the top stay green, indicating the door is open; in the mean time, the other indicators reflect the authentication results.

12_ System Initialization & Basic Operations