Samsung SSA-S1000 user manual To Register /DELETE Master ID, To REGISTER/DELETE ID Card

Page 13

TO REGISTER /DELETE MASTER ID

1.First turn off the product, and short-circuit two lines: purple line of Alarm Out and blue line of the Door Contact Sensor.

2.When you turn the product back on, you will hear the beep twice while all of the LED indicators turn red, and repeat turning on/off twice before being completely ON; then the Master card will be deleted.

3.Upon deletion of the Master Card, you will hear a beep once and all of the LED indicators toggle between green and red twice before turning off; in this condition, they turn red from bottom up in sequence.

Cable

Blue

Yellow

Green

Purple

Short-Circuit

White

Red

DC12V

SSA-S1000

SYSTEM INITIALIZATION & BASIC

4. When the deletion is completed, turn off the product.

Power

GND

Black

Connect the purple line of Alarm Out and the blue line of the Door

 

 

 

 

 

Contact Sensor back to their original ports, respectively.

 

 

 

5.When you turn the product back on, it recognizes and registers the first-read card as the Master Card. And if you present a registered user card to the product upon deletion of the Master Card, that card will be registered as the Master Card.

MIf you present a registered user card after the Master Card is deleted, that card will be registered as the Master Card.

TO REGISTER/DELETE ID CARD

1. If you present the Master Card to the product, it will sound the beep once and the first three LED indicators from the top will turn green from the top.

SSA-S1000

MASTER CARD

2.If you present a new user card to the product, it will sound the beep once and all of the LED indicators except for the first three ones from

the top will turn from red to green. Then, they all turn off and turn back on bottom up in sequence. When all of the LED indicators turn back on, they will turn red except for the first three LED indicators from the top . Then, the user card will be registered.

3.If you present a registered user card, the product will sound the beep twice and all LED indicators except for the first 3 from the top will turn red, and repeat turning on/off twice before being completely ON. Then the user card will be deleted.

4.When you present the Master Card to the product after the user card is deleted, the product will sound the beep once and all of the LED indicators turn red, starting with the first three LED indicators from the top turning from green to red.

MIf you present a registered user card after the Master Card is deleted, that card will be registered as the Master Card.

OPERATIONS

13

Image 13
Contents Please visit our website Standalone Rfid Access ControllerSafety information Safety informationThis device may not cause harmful interference, Important Safety InstructionsContents Product introduction FeatureDiode X UF4004, 1N4001~4007 WHAT’S IncludedMaster Card Keytag Quick Guide CD ManualFront/Rear AT a GlanceCable Selection Cable Color SchemeBypass Diode Connection InstallationInput Connection ConnectionOutput Connection When you present an unregistered card to the product When the power is suppliedInitializing the System by SHORT-CIRCUITING Basic OperationsTo Register /DELETE Master ID When the deletion is completed, turn off the productTo REGISTER/DELETE ID Card Troubleshooting TroubleshootingProduct specifications Product SpecificationsSSA-S1000 Output PortCorrect disposal of batteries in this product