gGE Security
Detector reset function
This function is used to reset Smoke Detectors and Zone Troubles. Your system must be Disarmed to use the Reset function.
Step 1 | Press |
| detectors have been reset. |
Step 2 | If the keypad begins beeping, the reset did not execute properly. Enter your code to silence |
| the keypad. Wait a few minutes and repeat step 2 to attempt another reset. If the keypad still |
| beeps after repeated attempts, please contact your installer. |
Setting the system clock
Step 1 | Enter [r][9][7]. |
|
|
|
|
| ||
Step 2 | Enter [master code]. |
|
|
|
| |||
Step 3 | Enter the “hour code” which must be two (2) digits. |
|
| |||||
| Note: The clock is a |
| ||||||
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
| Time | Hour Code | Time | Hour Code | Time | Hour Code | |
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
| |
|
| 12:00 Midnight | 00 | 8:00 AM | 08 | 4:00 PM | 16 | |
|
|
|
|
|
|
|
| |
|
| 1:00 AM | 01 | 9:00 AM | 09 | 5:00 PM | 17 | |
|
| 2:00 AM | 02 | 10:00 AM | 10 | 6:00 PM | 18 | |
|
| 3:00 AM | 03 | 11:00 AM | 11 | 7:00 PM | 19 | |
|
| 4:00 AM | 04 | 12:00 Noon | 12 | 8:00 PM | 20 | |
|
|
|
|
|
|
|
| |
|
| 5:00 AM | 05 | 1:00 PM | 13 | 9:00 PM | 21 | |
|
| 6:00 AM | 06 | 2:00 PM | 14 | 10:00 PM | 22 | |
|
| 7:00 AM | 07 | 3:00 PM | 15 | 11:00 PM | 23 | |
Step 4 | Enter the | “minutes code” which must be two (2) digits. |
|
| ||||
| Example: | 7 minutes after would be entered [0] – [7]. |
|
| ||||
Page 14 | 04/10/04 |