Audiovox XM-RVR-FM-001C Basic Operations, Turning XMCommander On and Off, Basic Channel Selection

6 s e c t i o n 3

Basic Operations

Turning XMCommander On and Off

Press to power the unit on or off. When first turned on, the receiver will automatically tune in to the last channel listened to and recall the previous settings.

Basic Channel Selection

Select a channel by number

1.Verify that XMCommander is in DIRECT entry mode. DIRECT should appear in the upper right

corner of the display. If A, B or C appears, press until the display says DIRECT.

2.Enter channel number using the number keys.

Select using presets

Your XMCommander can store up to 30 preset channels. They are organized into three different groups, or memory banks (Preset A, Preset B and Preset C), each with 10 channels corresponding to the 10 number keys.

Select channel presets

Press until an A, B, or C appears in the upper right corner of the display. Press the number key corresponding to the desired preset.

Setting channel presets

1.Tune in the channel you want to register as a preset.

2.Select either Preset A, Preset B or Preset C by

pressing until an A, B, or C appears in the upper right corner of the display.

3.Press and hold the number key corresponding to the preset you would like to set. The channel name and number will highlight and the audio will mute for 2 seconds to indicate that the preset is registered.

Tune to a channel using Tuning Wheel

Tune up and down the channel list by turning the

tuning wheel .

Turn the tuning wheel one increment or decrement to progress through a list of channels. Continue to turn the wheel to scroll through the list and display a new channel with each increment. To

select a channel, press .

Select a channel by remote control

When in DIRECT entry mode the up/down arrow

buttons on the remote control can be used to move up or down the channel list one channel at a time. When in PRESET mode they can be used to move up or down the preset channels in the current bank. Each new channel will be displayed for your preview without leaving your current selection.

1.To display a new channel using the up/down

arrow buttons, press buttons.

2.To select a channel, press . If a channel is not selected within 6 seconds, the unit reverts to the current selection.

3.For a fast tuning through the channel listing,

hold down the buttons continuously.

Caution: Set the volume control at a comfortable sound level—one that can be heard clearly without distortion.

The Electronics Industry Association’s Consumer Electronics Group suggest that you avoid prolonged exposure to excessive noise to reduce the risk of hearing damage or loss.