
7 | s e c t i o n 3 |
|
Basic Operations
Select Channel by Category (remote control)
On the remote control, press either of the category
keys to enter category search.
1.Continue pressing one of the category keys until a category you are interested in appears.
2.Use the buttons to display a channel within the given category.
3.Press to select a channel.
4.If you do not select a channel, category search will time out after several seconds.
Save and Recall Functions
You can save the artist name, song title, channel name and channel number on the current channel for future reference.
1.Press to save the information for the current song. Up to 15 different items can be saved at once, after which any new information that is saved will replace the oldest information in memory.
2.To recall saved information, press and hold for 2 seconds. “Memory 1” is displayed on the first line. The channel name and number appear on the second line. Next, the artist name and song title are displayed. To advance through your list
of favorites press on the remote control.
Display Options
The DISP/MENU button toggles between three display options:
1.Channel name, channel number, and artist name
2.Channel name, channel number, and song name
3.Artist name and song title
Menu Commands and Settings
Press and hold enters the menu section of XMCommander. Here, you can change each of the
following options using the tuning wheel or on remote and pressing to select the highlighted option. Following are the settings that can be changed:
FM Frequency
In “FM Frequency” mode, the current frequency and five additional frequencies are displayed. To select another frequency, rotate tuning wheel
or press up or down on the remote to highlight the desired frequency.
Press . “Set” and the new frequency number are displayed for 2 seconds.
Output Level
Use this to adjust the XMCommander
Contrast
This control allows you to adjust the contrast of your display.
TuneSelectTM
See pg 8.
Direct Tune
This feature changes the functionality of the tuning wheel so that it automatically selects a channel each time it is rolled, without having to press tuning wheel in. Note: XMCommander does not have a preview mode when this feature is active.