8 | s e c t i o n 4 |
|
Special Features
TuneSelect™ — New Feature!
TuneSelect is a new XM feature which allows you to “tag” up to 15 songs you like and have your XM Radio alert you when any of those songs is playing on a different channel.
Activating TuneSelect
To activate TuneSelect, press and hold the ENTER 
button at anytime during the playing of a particular song. When TuneSelect is activated, you
will hear a beep and Song Selected will be displayed on the screen for 2 seconds and then the unit will revert to the previous screen information. When one of your designated songs begins playing on any other channel, your unit will beep and SONG FOUND and the channel number and song name will display on the screen. To go to that song, simply press the ENTER 
button. If no action is taken within 8 seconds, your unit will revert to the previous screen information of the currently selected channel and TuneSelect will be
Managing TuneSelect Songs
To erase some or all of the songs identified in memory with TuneSelect, press the DISP/MENU 
button and using the tuning wheel, scroll to the TuneSelect option. Press ENTER 
to select. You will have the option to erase all songs or only selected songs. TuneSelect can accommodate up to 15 selections. Once 15 songs are selected, adding new songs will automatically replace the oldest song in the list.
Jump
Pressing 
on the remote causes the radio to revert to the last channel selected immediately prior to the current selection. A second press of 
returns you to the original channel played prior to initiating the jump process. With this feature, you can cycle back and forth between two channels.
Scan
You can scan through channels in one of the following ways:
Scan presets
When in the PRESET mode (in preset bank A, B or
C), pressing 
scrolls you through the preset channels in the active bank only. The unit scans channels beginning with the next preset higher in number than the current preset.
Scan Category
When in the CATEGORY SEARCH mode, pressing 
scrolls you through the channels in the current category only, beginning with the next higher channel than the current channel.
Scan All
When in DIRECT mode, pressing 
scrolls you through all channels, beginning with the next higher channel than the current preset.
Each channel scanned will play audio for 5 seconds after which the radio tunes to the next channel in the scanning order. To lock onto a particular
channel, press 
or 
within 5 seconds. Locking onto a channel automatically exits you from the scan mode. You can also exit the scan mode without making a selection by pressing any
of the following 
, 
or 
. XMCommander returns to the mode in which it operated prior to entering scan mode.
