JVC HR-J245EA specifications Engage Timer Mode

16ENTIMERRECORDING(cont.)

G-CODETimer Programming

Before performing G-CODEtimer recording, be sure to read "G-CODESetup" (☞ pg. 14).

2 3

q 5/8

	ADD TIME			WEEKLY
1	2	3
4	5	6
NUMBER	8
7/		9		CANCEL
	0		4	TIMER
DAILY
2
1	3			Á
¦	7		8
1	4			¢

PROG

3

OK

To Delay The Stop Time . . .

. . . press ADD TIME after pressing OK in step 3. Each time you press, the Stop time is delayed by 5 minutes (meaning that 5 minutes of recording time is added). You can easily compensate for anticipated programme schedule delays this way.

To Timer-Record Weekly Or Daily Serials . . .

. . . after pressing OK in step 3, press WEEKLY (NUMBER key “9”) for weekly serials or DAILY (NUMBER key “8”) for daily serials (Monday–Friday).

Before performing the following steps:

●Insert a cassette with the safety tab in place. The recorder will come on automatically.

●Turn on the TV and select the VIDEO channel (or AV mode).

ACCESS TIMER PROGRAMMING SCREEN

1	Press PROG.
		TIMER PROGRAMMING
		[0-9] : G-CODE
		[CANCEL] : EXPRESS PROGRAMING
		[MENU] : MAIN MENU
2	ENTER G-CODE NUMBER
	Press the appropriate	G-CODE
	NUMBER keys to enter the
	G-CODEnumber.	1 2 3 4 5 6
	● If you made a mistake,
	press CANCEL and enter	[0-9] =
	the correct G-CODE
		[CANCEL] : DELETE
	number.	[MENU] : EXIT
	CHECK INPUT DATA
	Press OK on the remote	– P1 –
	control. The G-CODE	G-CODE 12345678		STOP
3 Programming screen		START
		21:00 =	22:00
	appears.			SP
		DATE	TV PROG
	● If the G-CODEnumber
		25.12	29
	you entered is incorrect,	: OK
	"ERROR" will be
	displayed on the screen.
	Press CANCEL and enter the correct G-CODEnumber.

●If you want to cancel the programme even though "ERROR" is NOT displayed on the screen, press OK and then go to "Check And Cancel Programmes" on page 21.

●If "ERROR=GUIDE PROG" appears on the screen, see "ATTENTION – Regarding Guide Program Number Set" on page 17.

4	SET TAPE SPEED
	Press (SP/LP).
	RETURN TO NORMAL
5	SCREEN
	Press OK.
	● Repeat steps 1–5for each additional programmes.
6	ENGAGE TIMER MODE
	Press TIMER.